Change time on stove held clock button and got a 5Ab & can't chng

See this info:
How to Troubleshoot Maytag Range Code 5A6 eHow

What does the SAB error code mean on my Maytag Range ShopYourWay

you can try to unplug the oven and tell it sit for a minute then plug it back in or e-mail the manufactor and ask them what they do it's there product.

Your range is probably in the Sabbath mode. The error code shown on the display is"Sab", not "5ab".

To disable the Sabbath mode push and hold the Clock pad for 3 seconds

Read more: http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/2348-maytag-oven-weird-error-code-5ab.html#ixzz1GLM0d1gp
http://forum.appliancepartspros.com

amana oven reads SAb or 5Ab code? stove works, oven doesnt??? HELP

Hi.


The beeping sound is a warning because the oven is in lock condition. The oven is not faulty, and the code is not 5AB, but SAB.

SAB means that the oven is in Sabbath mode, and the control board will be locked for 72 hours with SAB on display.

If power is disconnected a new 72 hours cycle will start.

Push and hold the Clock button for about 10 seconds, that will reset SAB mode.

If that does not work leave the oven connected and off for 72 hours. If the oven does not unlock after three days, then the electronic control may be stuck in SAB mode because it is faulty, in that case contact the manufacturer at the number listed on the owners manual.

Regards.

You are set to Sabbath mode.
Try holding the clock button in for 5 seconds and that may correct it.

• push and hold the clock button for 3 seconds

According to the manual, this mode is SAB and not 5AB. SAB stands for sabath mode and lasts for 72 hours. The mode may be canceled by holding in the clock button for 3 seconds. This mode was activated by holding in the clock button for 3 seconds. My wife did the same thing when resetting the clock for daylight savings time this year. Resetting the power does not reset SAB mode.

same exact thing happened to me! Its not reading *5Ab* it's reading "Sab" as in Sab MODE...PRESS AND HOLD THE CLOCK BUTTON FOR A TOTAL OF 4 LONG SECONDS!! AND WAAAM!! Your stove is fixed and back to normal..with the Time! lol

My range showed a code of 5A6, I held the clock key down for a few seconds and it corrected itself.