When i turn on the device it stops at the pearl screen and never goes any further

I loved my Pearl but I misused it in a way that destroyed the SW inside. Study the user manual closely.

Set the brightness of the backlighting

1. In the device options, click Screen/Keyboard.

2. Set the Backlight Brightness field.

3. Press the Menu key.

4. Click Save.

Set how long backlighting remains on

1. In the device options, click Screen/Keyboard.

2. Set the Backlight Timeout field.

3. Press the Menu key.

4. Click Save.

Stop backlighting from dimming automatically

1. In the device options, click Screen/Keyboard.

2. Change the Automatically Dim Backlight field to Off.

3. Press the Menu key.
4. Click Save.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

try to do a master reset on the device..

You can try a master reset which your provider will be able to provide the steps to you on how to do it, or the manufacturer's website. if a reset doesn't fix it than you need to get a new phone through your replacement options for this is a device issue.

Sounds like the firmware on the device is corrupt. Try reinstalling the firmware, it can be downloaded here:
http://voxrightnow.custhelp.com/app/answers/detail/a_id/2556

You may want to back up the media on your device as a precaution before doing the upgrade if the media isn't currenlty on your computer.

Friend u get the unlocking code from http://www.mobile-unlocker.com/blackberry-pearl-8110/rs2wp9/ . It provides the unlocking code & unlocking instructions.I hope it's useful for you.

www.crackberry.com will help, just search in the forums for "recover a dead blackberry"

The other day I replaced my battery and my unit would not go any further than the Pearl logo. So I downloaded the firmware upgrade from http://voxrightnow.custhelp.com/app/answers/detail/a_id/2243/related/1, and followed all the troubleshooting instructions that popup when you start the program:

start the program,
remove the battery,
hold the play button while plugging into usb,
release the play button when the the term "initializing" replaces "searching",
click the start button to replace the firmware.

You might want to leave the "format data" box unchecked to see it that works. I couldn't play aac files without formatting, but you may not have to format to fix your problem.

After I did this, my pearl started normally, and my computer recognized it again.

Virus. Format the USB drive and make sure no more virus, then copy songs again making sure no virus.

Try performing a hard reset: remove the battery from the device while it is still powered on, leave it out for 30 seconds, then reinsert.