Hi everyone
I just installed these speakers and they work
GREAT sound-wise, but the LEDs don't light at all. I would appreciate any help offered.
Thank you very much.
An expert who has achieved level 2 by getting 100 points
MVP:
An expert that gotĀ 5 achievements.
Governor:
An expert whose answer gotĀ voted for 20 times.
Scholar:
An expert who has written 20 answers of more than 400 characters.
Expert
98 Answers
Re: LEDs don't light
???????????????
only on fixya would we get a complaint that speakers that are supposed to make sound work great but some lights on them dont work....
ugh.. ok with most of the spealers that have l.e.d.s typically have a seperate connection for the lights. The red wire goes to a switched 12 volt power source, the black goes to chassis ground... if they have power and ground but dont light up then they are junk...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello !! first of all check for bad connection on the led strips if all connection ok , test the single led one by one , at the end Do not Hesitate replace the leds strips . Because problem could happen after heating .
Hi, The speakers require a special Speaker wires that can be found at any big markets... Just visit any local market ,preferably Electronic stores and ask for it.. it is a piece of cake...you can do it.... Hope this helps! Take care and please Remember to rate/vote and give me 4 Thumbs Up for me to continue for Helping out the Community :) Thanks
This undoubtably is a driver problem. You could try running and installing in Administrator, mode and compatability Mode for XP SP2. Either that or ask Logitech whats their fix.
First check and make sure that the speakers are securely connected.
Then open sound and audio devices, in control panel, and scroll down to speakers,.
click on advance and change the selection to surround. .
click apply and OK you may have to restart to get the effects.
i dont know how ur tv does not have a earphone jack i wonder now a days how they make such tv's , pls try to take sound from audio LR if it helps other wise no hope to get sound on speakers sorry pls try to find in manual if there is any hidden headphone jack some where see in manual
as far as your first question it is possible. there may be an option in the bios. if not. you can bust out the soldering iron and solder the lines for you frontal mic port to the card.maybe put some sort of connector inline
and for your second question. there is no way. unless you upgrade your sound card. although i do have a logitech 5.1 system that uses some sort of matrix technology to emulate surround sound out of a standard stereo input. cost me 60 bucks and works great
T0X1K66O
Owner, Founder, Head Technician
Leading Edge Computers LLC [email protected]
Hi, Kazim
Firts things First:
1) check connector for 2 way sound. you can use a headphone for this.
2) you also buy Ipod dock sound speakers, there is Ihome speakers, great ones, for less than 25.00 dollars.
3) you have to see balance on those speakers.
good luck
×