Unplugging the TV worked. Thank you! (I had previously checked to see that the speakers were on but failed to mention it prior)
Thanks again!Unplugging the TV worked. Thank you! (I had previously checked to see that the speakers were on but failed to mention it prior)
Thanks again!
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
OCP ( Over Current Protection ) 02 blinks. There is shorted component/s at its main board. Check it. For more information go to http://electronicshelponline.blogspot.com/ There is more information about the blinking codes, and fault locating ideas described, to many brand TVs. Pull up older posts.
If you turn the tv off for about 1020 seconds, turn it back on and see if you have a clear picture, if not it sound like a power supply problem in the tv. but if that did not solve the problem, the
picture board on your tv is now malfunctioning or as gone bad, it means the
picture
board of your tv has developed fault and will need to be replace.
I
advice you replace the picture board on the screen of your tv to
solve the problem.
Tv has no picture or sound; will go out while watching. The picture will go into a line and sound and picture will go out; shortly after that tv will turn off. Did this last nite and I did not turn back on until this morning, it worked no problem. On for couple of hours and now it's out again. What could be problem and how do I fix myself
6/1/2010 11:34:21 AM Good morning I have sound problem it started with the cable hook up there box to the television, now sound is very low. Turn up the TV control to max, nothing but low sound. Of course cable people have no idea of a problem, I disconnected the cable but the same problem, love the set work for two years, note: thing happen when all analog change to digital. help!
opening the tv you will see a fuse it is surely open - you have to chenge with the same type and rating- pay attention to make this just after did you disconnect the pewer cord from ac outlet- delfo
I had the same problem and my local repair guy soldered a defective sensor so that it goes around that problem. I also had to buy a new bulb. Now my picture is "cloudy" and the repairman has no idea why. I am waiting for them to call back on it.
Unplugging the TV worked. Thank you! (I had previously checked to see that the speakers were on but failed to mention it prior)
Thanks again!
×