Windows XP I have an Aiwa IC-DP200 and i want to connect it to windows xp but i don't have any CD or any software,any idea please

You can easily change Windows XP administrator password by using Windows XP installation disk or by using password reset disk. If you don't have any of these disks then you can use stellar phoenix password recovery software.

1. boot your PC or laptop from the Windows XP CD (To do this, insert the Windows XP CD into your CD drive or DVD drive, and then restart your computer).
2. You will see "Press any key to boot from CD" displayed on the screen, at this point press any key to start the computer from the Windows XP CD.
3. You will see the Welcome to Setup screen, press ENTER to start Windows XP Setup.
4. Read and agree to the Microsoft Software License Terms, and then press F8.
5. Follow the instructions to select and format the c: partition where you want to reinstall Windows XP.
6. Follow the remander of the instructions on the screen to complete Windows XP Setup
7. Reinstall any drivers which are required.
8. Reinstall any software programs which you need.
9. copy your data back to the drive.

Check the USB port.

Hi,

Good day. I suggest for you to reinstall windows and use the repair options. Usually software encounter errors or some files might get corrupted causing your computer not to boot up properly. The repair option in Windows XP will help you to fix those issue. here are the steps to follow:

1. Rule out hardware issues. Windows Repair will only fix software problems. Hardware issues can also cause boot problems (i.e. bad hard drive, memory, CPU, or power supply).

2. Backup. It's always a good idea to backup your important data before making changes to Windows XP. Relax, if you follow these instructions your data will be perfectly safe.

3. Boot from your Windows XP CD. Insert the Windows XP CD into your computer's CD-ROM or DVD-ROM drive, and then restart your computer. When the "Press any key to boot from CD" message appears on the screen, press a key to start your computer from the Windows XP CD.

4. A blue screen will appear and begin loading Windows XP Setup from the CD.

5. When completed loading files, you will be presented with the following "Windows Setup" screen, and your first option. Select "To set up Windows XP now, press ENTER". DO NOT select Recovery Console.

6. Then press F8 to continue

7. Next, Windows Setup will find existing Windows XP installations. You will be asked to repair an existing XP installation, or install a fresh copy of Windows XP.

8. Then just choose repair option to repair your Windows Xp

9 Then it should work. If iin any case that will not solve the issue, you might try to install fresh copy on Windows Xp


Hope this information will help you resolve your issue. Have a great day.

You should have a system recovery disk. If you don't, then you will need a XP Home disk. As long as you have the XP installation code (usually placed on a sticker on the outside of your comptuer), you can use any XP Home disk. It's the product code that is really needed. Go borrow a CD from a friend and use your software code that is on your computer.

Hello,

To install Windows XP you first need a bootable Windows XP Disc or an ISO image. Using that you can boot your windows and install the operating system.

Once you get your bootable Disc or boot from the disc and follow the onscreen instructions to install the windows xp operating system. Make sure that you have all the data of yours backed up and you have a geniune windows xp product key.

once your operating system is intalled, connect the data card and insert the cd that came along with the datacard to install the drivers and the software. incase you did not get a cd, or you dont have one, please visit the site of the datacard manufacturer and download an appropriate drivers and software and install them. This should get your data card up and running.

Thanks and please remember to rate and leave a testimonial if you find the solution useful.

hi You need to get a Windows XP from someone and follow these instructions: Windows could not start because the following files is missing or corrupt \WINDOWS\SYSTEM32\CONFIG\SYSTEM or \WINDOWS\SYSTEM32\CONFIG\SOFTWARE
1. Insert and boot from your Windows XP CD. 2. At the first R=Repair option, press the R key 3. Press the number that corresponds to the correct location for the installation of Windows you want to repair. Typically this will be #1 4. Enter in the administrator password when requested 5. cd \windows\system32\config 6. Depending on which section was corrupted: ren software software.bad or ren system system.bad 7. Depending on which section was corrupted copy \windows\repair\system copy \windows\repair\software 8. Take out the CD ROM and type exit

well, is this a legal cd of XP? or did you pull it from the internet? if it is a original version of xp, please contact Microsoft, they will reactivate it, or sent you a new xp cd.

hi,
HP Officejet 5610 All-In-One InkJet Printer has few common problems. Such as Driver CD lost,Scanner does not work, Connection problem etc. For find all these software solution just clickhere....



http://www.hp.com/printer/prob676ijt65/solution

ab19

The only place you can get it free is from peer to peer file sharing which can lead to viruses and copyright infringement. Otherwise you can buy a download straight from Microsoft's website.