Driver for casio camera

after search on internet (google) i found this website where you can download software
Download the latest stable release 1.2.0 from sourceforge.net. You will need the following to run the program;

• Microsoft Windows XP, Vista, 7 32 or 64 bit, 8 32 or 64 bit
• Microsoft .NET Framework 4 (Included in W7 and W8)
• http://digicamcontrol.com/download

If the estimation of the main control board is high it is better to buy a new camera with better feaures than to invest on old technology.
So try if you get some benefit from scraping the camera for spares.

As I noticed it seems that the printer is either a legacy (old device) or a special kind of device that is only (usually) made for business purposes. If it is a legacy device then windows 7 should automatically detect and install the correct driver for that. if not then it is a special kind of device.
you can download this program and run it in your system.
check what kind windows your using by going to -start -right click on "COMPUTER" -If you see 64 bit in it then use the 64 bit windows If your using a 32 bit windows : http://www2.casio.co.jp/EZ-USB/download/en/download.php/FAB30_103000E.exe
If your using a 64 bit windows: http://www2.casio.co.jp/EZ-USB/download/en/download.php/FAB30_103000_x64E.exe
hope this helps

It seems you have to install the driver first. if you lost your camera driver
just simply buy card reader, so can still download the picture to your computer.

Hi there,
You can still download the drivers from the links below for your windows
For Windows 7 LifeCam 3.2 32-bit and 64-bit for Windows 7
For Windows XP (32-Bit) LifeCam 3.2 32-bit for Windows XP SP2 or higher (excluding 64-bit)
For Windows XP (64-Bit) LifeCam 2.04 for Windows XP 64-bit
Download the drivers, unplug the camera from the computer and run the setup Lifecam3.22.exe, Install the drivers and follow on-screen instruction, Within the setup it might will prompt you to plug in the camera, connect the camera and the drivers will be loaded automatically and you will need to restart your computer once,
If you require more assistance, feel free to reply to this post
Thanks For Asking FixYa! Regards-BA

Yes, you will need an updated driver for the camera to operate it on a Windows 7 system. Unfortunately, Casio does not list a Windows 7 driver for the EX-Z40. At this point your only recourse to to email Casio via the link below or call them at 1-800-435-77332.

https://www.casio.com/support/contactus/feedback/

I was successful installing a Casio Privia PX-575R USB midi keyboard to Windows 7 Ultimate x64!!!
I tried to use Yamaha, Korg, M-Audio, and some other drivers I don't remember and
they did not work.

I then downloaded the win 7 x64 driver for PC-50 from
http://www.roland.com/products/en/_support/dld.cfm?PRODUCT=PC-50&iRcId=16224976&dsp=1
(but I bet any of them would work) from Roland. All I did was change the hardware ID
in the INF file under

[Roland.NTamd64.6.1]
;; Windows7
%RDID0053DeviceDesc%=RDID0053Install, USB\VID_07CF&PID_6802

The ID is after the comma and the one you see above is from the Casio keyboard i have. The
hardware ID for your keyboard can be found in "device manager". Just choose your
hardware/keyboard and go to "details" and choose "hardware id" from the drop down
menu and put that after the comma. It will start with "USB" since it is a usb
devise. There may be more than one ID but the first one works for me. Then just do
a manual install by right clicking "computer" or "my computer" and click "device
manager" tab. Then find your keyboard (probably a yellow exclamation mark next to
it) and double click it. Then go to the "driver" tab and click "update driver".
Then choose "Browse my Computer for driver software", then "Let me pick from a list
of device drivers on my computer", then "Have Disk..." and browse for the INF file
you just put the hardware ID in and click "open".

You now have a working Casio keyboard for a 64 bit or x64 windows 7 operating system.
You can do the same with Vista x64 or XP x64, just download those drivers and edit the hardware ID the same way.

Thanks

This is the download page for Exilim, from Casio.

Scroll down the page to find USB drivers and all software for your camera, ensure that you download drivers for correct model, and software for your windows version:

world.casio.com/qv/download/en/

Try these procedures.

You don't need a driver.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.