Question about Bending Branches Boating

1 Answer

Crankshaft key busted out broke crank key slot on one side.

The crankshaft key that goes between the pulley and the crankshaft busted out ,and bent one side of the crankshaft slot and broke the bolt off is there any way to fix crankshaft slot with out having to have to get a new one?? Also the crankshaft makes a banning noise when i start the engine. please help..

Posted by mikeburykin on

Ad

1 Answer

ray gallant

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Bending Bran... Master
  • 68,621 Answers

Sadly there is no fix but a total new crankshaft .

Posted on Jan 06, 2018

Ad

5 Related Answers

darin brown

  • 393 Answers

SOURCE: Crankshaft pulley (vibration damper) moved forward.

the pulley is also a dampener often times they seperate from each other. replace pulley/dampener.

Posted on Nov 18, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: crank shaft inner pulley lose on 2003 Exterra 3.3

I don't have one. I have the same problem can someone help?

Posted on Nov 22, 2008

Anonymous

  • 1 Answer

SOURCE: geo metro 1998 crankshaft pulley.

Man my bes advcice is to take the engine dow, cuting a hole on the fender dosent soun very practical. Lowering the engine dow is no big deal anyways.

Posted on Dec 09, 2008

Anonymous

  • 89 Answers

SOURCE: Crankshaft pulley bolt broke. How do i get it out????

You will have to drill the bolt out completely. You could first try an extractor set, it will have to be drilled to the size on the extractor set, use a product called PB Blaster and let it soak for a few days reapplying every 12 hours or so. If it broke off you may not be able to get it out with an extractor set but use the biggest extractor that will fit. If you have the head of the bolt and any threads showing you will have to fid a HSS Drill bit a little smaller than the outer diameter of the threads. then carefully drill the bolt out, it will take forever so take your time, I have set up drills with blocks and bungee cords so it will drill itself without you being in atendance, but the drill has to be positioned precisely as to not damage the inside diameter of the threads for when you install the new bolt. I even went so far at times at home to install a video camera to a small tv inside the house so I could monitor if the drill had changed position. I recently had to do exhaust bolts (6) and a spark plug that had rusted and broken off inside the motor, just the threaded portion of the spark plug was all that was there.

Posted on Feb 12, 2009

SOURCE: which way do you turn the crankshaft pulley bolt to loosen it?

It turns left (counterclockwise) to remove. An impact wrench is best if you can get one on it.

If you don't use an impact wrench, you may need to somehow keep the crank from turning when you loosen the bolt.

One way is to pull the belt tighter to put more tension on the crank pulley.

There are other creative ways I've used. If you have any trouble let me know.

Posted on May 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Crankshaft Pulley wobbles on 1997 ford aspire


make sure the pulley bolt is tight then check the pulley for being bent. if these 2 things are good then you may have a bent crankshaft at the pulley end or worn crank bearing causing it to wobble.

Mar 01, 2015 | Ford Cars & Trucks

1 Answer

How to install balance drive gear on crankshaft 2007 Camry 2.4


Remove old crankshaft pulley ( Harmonic Balancer), by putting sturdy socket,think its 19mm, or 3/4 " on the center crankshaft bolt, with a good size breaker bar, wedge the breaker bar in between the suspension, and drive axle, to keep the breaker bar from spinning, while, you now turn the key inside the car, to engage starter, to spin the crankshaft,which may take several attempts, of turning the key, and putting socket back on, they are very stubborn,to break the center bolt loose,
Then remove harmonic balancer, with a PULLER, which requires 2 bolts, in the threaded holes, one on each side of the now empty center bolt hole, autozone , advance, has these to loan out, only requires deposit, which they give back to you, when you return it.
Put square key in slot on bare crankshaft, slide harmonic balancer,(crankshaft pulley,while lining up the square key,and tighten crankshaft bolt.

Oct 24, 2014 | 2007 Toyota Camry

1 Answer

Please could you give me a diagram of the valve timing of a double O.H.C.on a toyota Rav4 3SFE engine


no year(94-present) stated. and under kia dont help much.

its at alldtata.com, i read all the steps and not skip one, I WOULD.

wild guess, #1 a 2005 RAV4
2.0L 3sfe. inline 4 cylinder, not V6


here is the one i see on the FSM.

my gates belts all come with a manual. RTM?
if you buy the belt at a dealer they assume you have the FSM.
right?
FSM, install, steps
  1. Install the oil pump pulley. Tighten the nut to 18 ft. lbs. (24 Nm).
  2. Install the crankshaft timing pulley. Align the pulley set key with the key groove of the pulley. Slide on the pulley facing the flange side inward.
  3. Install the No. 2 idler pulley and tighten the mounting bolt to 31 ft. lbs. (42 Nm). Be sure that the pulley moves smoothly.
  4. Install the No. 1 idler pulley with the bolt and the tension spring. Pry the pulley toward the left as far as it will go and tighten the bolt. Make sure that the pulley moves smoothly.
  5. Temporarily install the timing belt. Using the crankshaft pulley bolt, turn the crankshaft and position the key groove of the crankshaft timing pulley upward. If reusing the timing belt, align the points marked during removal.
  6. Install the timing belt on the crankshaft timing pulley, oil pump pulley, No. 1 idler pulley, water pump pulley and the No. 2 idler pulley.
  7. Install the timing belt guide.
  8. Install the lower (No. 1) timing belt cover and new gasket with the 4 bolts.
  9. Align the crankshaft pulley set key with the pulley key groove. Temporarily install the crankshaft pulley and bolt.
  10. Align the camshaft knock pin with the groove of the pulley, and slide the timing pulley onto the camshaft with the plate washer and set bolt.
  11. Tighten the pulley set bolt to 40 ft. lbs. (54 Nm).
  12. Turn the crankshaft pulley and align the 0 mark on the lower (No. 1) timing belt cover.
  13. Finish installing the timing belt and check the valve timing, as follows:
    1. If reusing the old timing belt, align the matchmarks made previously and install the timing belt onto the camshaft pulley.
    2. Align the marks on the timing belt with the marks on the camshaft pulley.
    3. Loosen the No. 1 idler pulley set bolt 1 / 2 turn.
    4. Turn the crankshaft pulley 2 complete revolutions TDC to TDC. ALWAYS turn the crankshaft CLOCKWISE. Check that the pulleys are still in alignment with the timing marks.
    5. If the No. 1 idler pulley uses a green tension spring, slowly turn the crankshaft pulley 1 7 / 8 revolutions, and align its groove with the mark at 45 degrees BTDC (for the No. 1 cylinder) of the No. 1 timing belt cover.
    6. Tighten the No. 1 idler pulley set bolt to 31 ft. lbs. (42 Nm).
    7. Be sure there is belt tension between the crankshaft and camshaft timing pulleys.
  14. Place the right-hand engine mounting bracket in position but do not install the bolts.
  15. Install the upper (No. 2) timing cover with a new gasket(s).
  16. Remove the engine crankshaft pulley bolt and pulley.
  17. Using SST 09249-63010, or equivalent, install the mounting bolts for the right-hand mounting bracket. Tighten the mounting bolts to 38 ft. lbs. (52 Nm).
  18. Align the crankshaft pulley set key with the pulley key groove. Install the pulley. Tighten the pulley bolt to 80 ft. lbs. (108 Nm).
  19. Install the spark plugs.
  20. Install the right-hand mounting insulator, as follows:
    1. Attach the mounting insulator to the body and mounting bracket with the 4 bolts and 2 nuts.
    2. Tighten the 3 bolts to hold the mounting insulator to the body. Tighten the bolts to 47 ft. lbs. (64 Nm).
    3. Tighten the 2 nuts and bolt to hold the mounting insulator to the mounting bracket. Tighten the bolt to 27 ft. lbs. (37 Nm) and the nut to 38 ft. lbs. (52 Nm).
  21. Install and adjust the power steering pump drive belt.
  22. Install the right-hand engine undercover.
  23. Install the right front wheel.
  24. Lower the engine.
  25. If equipped, install the ABS actuator.
  26. Install the alternator and alternator bracket.
  27. Install the wiring harness bracket for the DLC1.
  28. Install the power steering reservoir bracket and reservoir.
  29. Connect the negative battery cable.
  30. Start the engine and check the timing.

step 13.4 is never to be skipped. ask why., most do. and it fails.






a70ecb7d-3231-4383-bdd9-edd2200c74a4.jpg

Jun 07, 2014 | 2002 Kia Sportage

1 Answer

1993 SUBARU LEGACY CRANKSHAFT PULLEY IS OF BEFORE FINDING TOP DEAD CENTER WHAT MUST I DO TO PROPERLY INSTALL THE CRANKSHAFT PULLEY IN RIGHT POSITION AND DOES THIS PULLEY GET A KEY STOCK INTO THE SLO


If you mean your fan belt or drive pulley broke and you want to replace it, there is no timing position unless there is a Woodruff Key for the pulley and that is straight forward.

Aug 14, 2017 | Subaru GL Cars & Trucks

2 Answers

The pully for the water pump that is attatched to the crank shaft is broke and i dont know how to take it off


The crankshaft pulley will have one big bolt in the center and it takes a lot of torque to loosen it. Once the bolt is out ( after all the belts are removed) you may need a tool called a harmonic balancer puller. It will have slots in it that you put bolts through and bolt it to the pulley, then there is one large bolt in the center that presses against the crankshaft and forces the pulley off.

Aug 22, 2011 | 1997 Oldsmobile Aurora

1 Answer

Como poner la banda de tienpo de un toyota camery


Installation
1.Install No. 2 idler pulley (if removed). Install and tighten bolt to specification. See TORQUE SPECIFICATIONS . Ensure idler pulley is clean and rotates smoothly. 2.Install No. 1 idler pulley and tension spring (if removed). Pry No. 1 idler pulley away from timing belt area as far as possible. Temporarily tighten No. 1 idler pulley bolt. Ensure idler pulley is clean and rotates smoothly. 3.Using crankshaft pulley bolt, rotate crankshaft so timing mark on crankshaft sprocket aligns with timing mark on oil pump housing. See. This will position keyway in crankshaft sprocket at 12 o'clock position.

CAUTION:If reusing timing belt, ensure reference marks on timing belt align with reference marks placed on crankshaft and camshaft sprockets. Ensure timing belt is installed in original direction of rotation.
4.Ensure all sprockets and idler pulleys are clean. Install timing belt on crankshaft sprocket, oil pump sprocket, No. 1 idler pulley, and then No. 2 idler pulley in sequence. 5.Install timing belt guide with cupped side away from crankshaft sprocket and flat side toward timing belt. Install No. 1 timing belt cover and new gasket. 6.Align crankshaft pulley key groove with key in crankshaft. Install crankshaft pulley. Install and tighten crankshaft pulley bolt to specification. 7.Rotate crankshaft clockwise so cylinder No. 1 is at TDC on compression stroke. Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover. If reusing timing belt, ensure reference mark on timing belt aligns with upper edge of No. 1 timing belt cover. 8.Rotate camshaft, and align hole in camshaft sprocket with alignment mark on camshaft bearing cap. See Fig. 2 . Install timing belt on camshaft sprocket. If reusing timing belt, ensure reference mark on timing belt aligns with the reference mark on camshaft sprocket. Ensure tension exists on timing belt between the crankshaft and camshaft sprockets.
CAUTION:DO NOT rotate crankshaft counterclockwise, as viewed from timing belt end of engine.
9.Loosen No. 1 idler pulley bolt 1/2 turn. Rotate crankshaft pulley 2 full revolutions clockwise from TDC to TDC. 10.Ensure timing mark on crankshaft pulley aligns with "0" mark on No. 1 timing belt cover, and hole in camshaft sprocket aligns with alignment mark on camshaft bearing cap. See Fig. 2 . If timing marks are not aligned, remove timing belt and reinstall. 11.Rotate crankshaft clockwise 1 and 7/8 revolutions and align crankshaft pulley "0" mark with 45-degree Before Top Dead Center (BTDC) mark on No. 1 timing belt cover. See Fig. 5 . 12.Tighten No. 1 idler pulley bolt to specification. See TORQUE SPECIFICATIONS . Install No. 2 timing belt cover and gaskets. Install and tighten spark plugs to specification. 13.To install remaining components, reverse removal procedure. Install all bolts/nuts on right (timing belt side) engine mount before tightening to specification. 14.On Camry, when installing control rod and bracket on strut tower and right (timing belt side engine mount, tighten bolts to specification in sequence.

Dec 23, 2010 | 1993 Toyota Camry V6

1 Answer

Procedure in changing timing belt


Timing Belt and Sprockets REMOVAL & INSTALLATION 2S-ELC, 3S-FE and 5S-FE Engines
  1. Remove the timing belt covers as previously detailed.
  2. Raise the engine just enough to remove the weight from the engine mount on the right side.
  3. Remove the thru-bolt, two nuts, and right hand mounting insulator.
  4. Remove the retaining bolts and remove the right hand mounting bracket (from the side the alternator was removed from).
  5. Remove the timing belt and timing belt guide. If the timing belt is to be reused, draw a directional arrow on the timing belt in the direction of engine rotation (clockwise) and place matchmarks on the timing belt and crankshaft gear.
  6. Remove the bolt retaining the No. 1 idler pulley and tension spring.
  7. Remove the No. 2 idler pulley.
  8. Remove the crankshaft timing gear , if it can not be removed by hand, use two flat bladed tools to pry it off. Make sure to position shop rags to prevent damages to the components.
  9. Remove the nut retaining the oil pump pulley. To install:
  10. Align the cutouts of the oil pump pulley and shaft, and slide the pulley on. Retain the pulley while tightening the nut to 21 ft. lbs. (28 Nm).
  11. Align the crankshaft timing pulley set key with the key groove of the crankshaft pulley, then slide the pulley on.
  12. Install the No. 2 idler pulley with the bolt and tighten to 31 ft. lbs. (42 Nm). Be sure the pulley moves smoothly. NOTE: Remove any oil or water on the idler pulley and keep it clean.
  13. Temporarily install the No. 1 idler pulley with the retaining bolt. Hint: use a 1.65 inch (42mm) bolt in length. Do not tighten the bolt yet. Install the tension spring. Pry the pulley toward the left as far as it will go, then tighten the bolt.
  14. Turn the crankshaft until the key groove in the crankshaft timing pulley is facing upward. Install the timing belt on the crankshaft timing, oil pump, No. 2 idler and water pump pulleys. NOTE: If the old timing belt is being reinstalled, make sure the directional arrow is facing in the original direction and that the belt and crankshaft gear matchmarks are properly aligned.
  15. Install the lower (No. 1) timing belt cover and new gasket with the four bolts.
  16. Align the crankshaft pulley set key with the pulley key groove. Install the pulley. Tighten the pulley bolt to 80 ft. lbs. (108 Nm).
  17. On 2S-ELC engines, turn the crankshaft pulley and align the 0 mark on the lower (No. 1) timing belt cover.
  18. Align the camshaft knock pin with the matchmarks on the oil seal retainer.
  19. On 2S-ELC/USA engines, align the knock pin with the pin hole on the timing pulley E mark side. On 2S-ELC/Canadian engines, align the knock pin with the pin hole on the timing pulley. On 3S-FE and 5S-FE engines, align the knock pin with the groove of the pulley, and slide the pulley onto the camshaft with the plate washer and set bolt. NOTE: On 2S-ELC engines, make sure that the Matchmark on the oil seal retainer and center hole of the small hole on the camshaft timing pulley are aligned.
  20. Using the removal tool to hold the pulley stationary, install and tighten the pulley set bolt to 40 ft. lbs. (54 Nm) on the 2S-ELC and the 3S-FE. On the 5S-FE, tighten the set bolt to 27 ft. lbs. (37 Nm).
  21. On 3S-FE and 5S-FE engines, turn the crankshaft pulley and align the 0 mark on the lower (No. 1) timing belt cover.
  22. Install the timing belt and check the valve timing as follows:
    1. Align the matchmarks that you made previously, and install the timing belt onto the camshaft pulley.
    2. Loosen the No. 1 idler pulley set bolt 1⁄2 turn.
    3. Turn the crankshaft pulley two complete revolutions TDC to TDC. ALWAYS turn the crankshaft CLOCKWISE. Check that the pulleys are still in alignment with the timing marks.
    4. Tighten the No. 1 idler pulley set bolt to 31 ft. lbs. (42 Nm).
    5. Make sure there is belt tension between the crankshaft and camshaft timing pulleys.
  23. Install the upper (No. 2) timing cover with a new gasket(s). On the 5S-FE, align the two clamps for the engine wiring harness with the cover mounting bolts.
  24. Install the spark plugs.
  25. The remainder of installation is the reverse of removal. Tighten each component to specifications.

Aug 04, 2010 | 1996 Toyota Camry

2 Answers

TRYING TO RMOVE CRANKSHAFT PULLEY


yes, thats tone ring for crank sensor,car may run bad and trun on check engine light.good luck.

Oct 06, 2009 | 2000 Daewoo Lanos

1 Answer

The belt broke so I need to know where the timing marks should be in order to replace a broken cam gear and belt on 98 hyundai accent sohc


First you need to find out if this is a "safe" engine, a few are but most bend some valve when the belt goes (you could try turning gently by hand using the alternator belt) proceed as follows:-remove the drive belts, water pump pulleys, crank pulley, and the upper and lower timing covers.  You'll also need to remove the motor mount if 
You'll need to move the tensioner for installation of the new belt.  Loosen both the pivot and clamp bolts on the tensioner.  Pry the tensioner up and toward the back of the car, and when at the rearmost position, tighten the clamping bolt.

You'll also need to line up the camshaft and crankshaft to TDC.  There's a small hole in the camshaft sprocket that lines up with a notch in the front camshaft bearing cap.  The hole should be pretty much straight up when aligned.  There's a notch in the crankshaft sprocket that lines up with a *** on the front case of the engine.  If I recall correctly, this puts the Woodruff key at about 3:00 when aligned.  

Then install the timing belt with all the slack on the tensioner side.  Loosen the tensioner clamping bolt to release the tensioner, let it self-tension with the spring force, and retighten the clamping bolt.  Turn the engine clockwise with the crankshaft two crankshaft revolutions (1 cam revolution).  This will make sure you have the proper amount of slack on the tensioner side.  Recheck to make sure your marks are still aligned.  Then loosen the tensioner clamping bolt once again to let it self-adjust, and tighten the clamping and pivot bolts.  

After that, it's just a matter of putting everything back that you took off, but before doing anything, you may wish to consider that it's likely engine damage was done when the timing belt broke.  You may wish to pull the plugs and examine before you start anything mentioned above.  Evidence of anything hitting the plug is a sign of a valve broken off and probably a need for an entire engine.  You may also, after installing the timing belt, wish to bolt the crank pulley back on and see if the engine starts.  If the engine cranks quickly (lack of compression) and won't start, you've at least bent some valves and will need to remove the cylinder head. 

Aug 21, 2009 | Hyundai Motor 1998 Accent

Not finding what you are looking for?
Boating Logo

Related Topics:

589 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bending Branches Boating Experts

ray gallant

Level 3 Expert

68621 Answers

 vpsoccer
vpsoccer

Level 2 Expert

282 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

33395 Answers

Are you a Bending Branches Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...