Question about General Electric RCA-25424RE1 4-Line Corded Phone

1 Answer

Pluged in my phone line and the phone reads Error

We have three phone line but only one phone cord that's connected to our current phone system, but we are upgrading to the RCA. there's only one problem, the RCA has two separate ports for 4 line two phone lins in each. but when i plugged our current line into the RCA there's an error message, it won't support it. so we disconnected the phone and hooked it to one phone with a regular phone wire it works and rings one line 1. what do i need to connect all of our line into the RCA

Posted by kimberlyamin on


1 Answer

Greg Standerfer

  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 45 Answers

Your old phone my have been for a digital phone line. The new phone only works on traditional telco analog. There are adaptors that your phone company has to make the line analog.

Posted on Jul 21, 2010


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Phone reads line cord error please check. Everything is plugged in correctly so what should I do

Line error means that the phone is no able to detect a signal on the system that it is plugged into. There are a lot of causes of this. It could be a bad phone, bad cable, bad connection in the boxes in the wall or outside or the phone company may have disconnected it,

Oct 20, 2017 | In Office Equipment & Supplies

1 Answer

I've just bought the above phone and connected tomains to charge batteries and handsets show "line chord error" is this because the phone line has yet to be plugged in?

yes, it will either show line cord error, or no line. After phone is charged plug line cord in and it should go away if not check line cord or try another known good cord.

Aug 11, 2015 | Lands Phones

1 Answer

A test on my J3680 printer says wrong phone cord. Never heard of that.

You answered your own question. Cable phones are digital Voice over IP devices. Your printer is looking for an analog phone like is connected to a land line the telephone company provides

Sep 24, 2014 | HP J3680 Officejet All In One Printer

1 Answer

Check line cord phone mean

The cord or cable connecting the phone to your pstn line is called line cord. check the connection at the back of phone and the wall jack. if it is ok change the cord and check.

Jul 20, 2013 | British Telecom Synergy 2110 Cordless...

2 Answers

I have a hp photosmart c7280 all-in-one printer fax copier scanner when some one sends me a fax it wont go through when i access the tool section on the printer and try to run a test page is says fax...

chances are your phone line is not a dedicated outgoing data transmission line : result of the phone companies keeping tabs on their property and its usage. if you are using a regular phone line, you have to call for the phone co. to add the data transmit feature.

Jan 19, 2012 | HP Photosmart C7280 Laser Printer

2 Answers

I am trying to send a fax using my lexmark x5650; I continue to receive a message that reads 'phone line is in use'. The phone line is currently not in use. Any help or suggestions will be...

try contacting your telephone service provider asking is your line is allowed to fax .becoz some service providers block the fax line if it hasn't been using the fax for a long period of time.

May 19, 2011 | Lexmark X5650 All-in-One InkJet Printer

1 Answer

No dial tone both units

You have almost left no stone unturned. It is either a bad base station or a bad cord between the base and the jack. Try a new cord.

Jun 26, 2009 | GE 25840GE3 Cordless Phone

1 Answer

Error 4103

A loop current problem indicates that the phone line is not connected to your fax correctly, the cord is broken or where you have plugged into the wall is dead

Jun 22, 2009 | Brother IntelliFAX 4100 Laser Fax

2 Answers

Phone is dead! M7310

There is no power cord required for an M7310 set. The set gets all the power from the Nortel telephone system. Try plugging in your phone where another phone is active to ensure that your phone that you want to install is working. The phone flashes, then stops, then flashes, then stops... you just have to be patient when testing. Possible Troubles: -> It maybe the line cord, the cord that plugs in from the wall to the phone that can be damaged. -> the jack might be dead (wiring in the jack is pulled off) or inactive (there is no jumper from the office to the telephone system). -> the phone port from the telephone system might be dead.

Jun 06, 2009 | NorStar Meridian M7310 Phone

1 Answer

Error message -no loop current

It can't find a DIAL TONE check the line with a regular phone.

Mar 06, 2009 | Philips Magic5 Voice DECT Duo - Fax /...

Not finding what you are looking for?
General Electric RCA-25424RE1 4-Line Corded Phone Logo

300 people viewed this question

Ask a Question

Usually answered in minutes!

Top General Lands Phones Experts

Cindy Wells

Level 3 Expert

6131 Answers


Level 3 Expert

85239 Answers


Level 2 Expert

42 Answers

Are you a General Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides