Question about Danco Faucet Stem

2 Answers

How does a 9s-4h/c danco stem install. - Danco Faucet Stem

Posted by billymala on

  • tom_steph Apr 11, 2009

    The problem I have is that there are no instructions for instllation for the Danco 9S-H/C stem 17469B . There are springs and washers and I don't know what order they go in or what direction.

  • Anonymous Mar 15, 2014

    How do i install a danco diverter stem?

×

Ad

2 Answers

Bill Johnson

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 306 Answers

The spring goes in first then the rubber seat goes on top.put them together first on a small screwdriver,insert on hole push down on rubber into hole it should stay.replace stem in reverse order of takeing off.

Posted on Jul 27, 2009

Ad

Donni Steen

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 687 Answers

It's threaded and you use a stem removal tool to remove the old one. Make sure before installing the new stem, that you replace the seat in the manifold or faucet housing.

Posted on Apr 09, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO YOU ASSEMBLE AND INSTALL A DANCO 9S-4H/C


Turn off the water supplying the faucet. Now open the faucet. Remove handle by taking off index button and removing screw. You may need to purchase a handle puller, 10-15 dollars, and a stem wrench set. After removing handle, place appropiate sized wrench on stem and turn counter clockwise. Before installing stem, make sure it is in the open position. You may need to use the handle to turn the new stem. Screw in clockwise.

Jul 05, 2014 | Danco Faucet Stem

1 Answer

How to install a danco 10472 4z-24h/c hot & cold faucet stem


  • Shut off water supply
  • Open faucet
  • Remove knob
  • Unscrew old stem
  • Use flashlight to inspect seat for damage and corrosion. Dress or replace seat if necessary.
  • Install new stem
  • Reinstall knob
  • Turn on water supply and check for leaks

Feb 09, 2014 | Danco Faucet Stem

1 Answer

I bought the Danco replacement stem for a milwaukee faucet(part 4s-6h/c) it is leaking from the handle... do I need to replace the plastic part that runs back into the pipe? Is there an easy way to remove...


Sometimes on the stems on the side the handle attaches is a nut that can be tightened. Inside this nut is a rubber or other type of seal. tightening this nut stops the water from coming out of the handle. If the nut has already been tightened then possibly need to replace this rubber seal.

Sep 02, 2010 | Danco Faucet Stem

1 Answer

I bought a Danco 3H-10H/C, Hot/Cold stem. The problem is, it seems to be setup for hot (clockwise closes the valve, counter clockwise closes it). Is it reversable? Or is it not really a hot/cold...


One of two things has happened. I'm assuming you only get hot water when you open the valve and that this is for a single handle control shower fixture. If so either this is the wrong valve for your shower control or it is installed backwards. Sometimes the valve can be installed at either 180 degree angles. See if it can be installed any other way. If so this may solve the problem.

Jul 18, 2010 | Danco Faucet Stem

1 Answer

I have a Danco 9C-23H/C stem for an American Standard shower stem replacement. I'm trying to identify where the friction ring is supposed to be placed. I've seen it in pictures going on the end where the...


there is never a fiction ring at the washer end, sometimes there is a cup shaped part that holds the washer but nothing else so it must be intended to go around the stem

Jun 27, 2010 | Danco Faucet Stem

2 Answers

Where does washer go for 12h-6h/c stem from Danco for faucet?


Is it brass, stainless, plastic or rubber? I think a stainless one might be for the knob screw, I don't think there is one inside, it might just have fallen into the pack. We get weird stuff all the time that doesn't belong. Hope this helps.

May 31, 2010 | Danco Faucet Cartridge

2 Answers

I bought a replacement Danko faucet cartridge for an american standard bathroom sink and the package said hot/cold but when I installed it on the cold side the handle turns the wrong way. How do I reverse...


Thae stem you got that said hot/cold were designed to fit old style cross handle faucets. So both hot and cold turned the same way. If the cold side you are replacing turns the opposite direction then you will need to get a cold stem. Danco does make them. Ask the retailer where you purchased the H/C stem. I hope this helps..

Dec 29, 2009 | Danco Faucet Cartridge

1 Answer

How to modify Danco handles to work on Valley II faucets


Do not modify the handles, just buy the pieces missing. they are available through Danco. Even though i prefer using original parts.

Jan 10, 2009 | Plumbing

Not finding what you are looking for?
Danco Faucet Stem  Logo

Related Topics:

3,801 people viewed this question

Ask a Question

Usually answered in minutes!

Top Danco Home Experts

Bill Johnson

Level 2 Expert

306 Answers

mehan

Level 1 Expert

19 Answers

Tom Chichester

Level 3 Expert

56003 Answers

Are you a Danco Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...