Sansa m230 (512 MB) MP3 Player still not working after do what you told me

Because you drag 7 drop songs or files too much into the sansa clip in MSC mode, it causes like that.
Turn it on, it will show " Not enough.....free 30 MB", and then automatically turn off. Plug it into pc, open my computer, it will be under name "Sansa clip..." or "removable disk ". If your pc does not recognize it, unplug again and replug it.
Open Sansa Clip..., or removable disk, and delete some songs.
Good luck

Try this tip posted here -->Solve your MP3 Player Connection Problem.

format the device using windows.

Format the player and use Windows Media Player 10 or higher to sync the player.

http://www.sansaworldmp3.com/
http://www.sansaworld.com/

where should i get my music download or uploaded from because it will not work in windows media player

i tell you connect to the computer your device
and right click on your device and format it

The device needs at least 4MB of free space.

You need to keep deleting files until there is 4MB less than the total capacity of the device.

Its not syncing because the device is too full.

If removing the 4MB doesnt work. Try formatting the device thru My Computer>Device Name (m200)>Right Click and select FORMAT.



Best of Luck.

Please RATE my solution BELOW.

it might need a new battery for it then plug it into your computer and sync it with windows media player

sandisk have a upgrade to fix connection problem download, install it ,plug it and upgrade it via internet. works for me.

First switch your USB control to MSC. Then turn off your mp3 player and activate the hold icon. Then turn it on while holding the record button with hold icon still being activated. then it will go to recovery mode. Now plug your sandisk into the computer and wait until it says RECOVERY COMPLETE...PLEASE DISCONNECT or when it just says for you to disconnect. This worked on my sandisk, and it hopefully work for you.