Question about LG WM2077CW Laundry XL Front Load Stackable Washer
Press the "End of Cycle Signal" button, the last button on the bottom right, for 5-10 seconds. That should resolve the problem.
Uppi
Posted on Feb 03, 2008
Press "stop" + "cancel" for over 5 to 10 seconds. Or
"auto" + "cancel" for over 5 to 10 seconds, the display could clear.
Posted on Nov 25, 2007
Have you tried holding the control lock button down for like 5-10 seconds? Sometimes child lock gets turned on if its equipped on your model. If that doesnt work, it may be a control board issue. Good Luck Jim
Posted on Sep 07, 2007
Hello & Welcome to FixYa
This is a common issue with Whirlpool Duet washer
however, your whirlpool duet washer needs a reset to resolve the control lock
problem. Press and hold the END OF CYCLE /CYCLE SIGNAL button for 15 seconds to
reset the control. Please get back to me if you have any other questions.
Kevin
578 views
Usually answered in minutes!
control lock, tried holding contol button,cancel button and start button with combination of all 3, even unplugged machine with no resolution control lock red light remains on.
Any suggestions would be helpful.
[email protected]
if I push the cancel button unit stops if I push it again the unit turns on
×