Sharp AR-5316 Advanced Digital Imager Copier Logo

Question about Sharp AR-5316 Advanced Digital Imager Copier

3 Answers

H2 error I have a sharp copier AR 5316 shows error by flashing h and 2 i guess that means H2 when turned on. what is the error? and how can i solve it fast it is bugging me please i need help

Posted by visiontee on

Ad

3 Answers

safiullah sadeed

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have a Sharp AR 5320 copier machine which show h error code please help me . and send information .

Posted on Dec 04, 2012

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

An H2 is an indicator that the temperature sensing device is reading open, preventing the machine to warm up. There is only one way to correct this and that is to replace the thermistor, and that takes a technician. Not a hard job but a novice could get into trouble and make matters worse. Aloha, Bill Monroe

Posted on Sep 06, 2007

Ad

mahmood

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I have the same problem with my ar5316 sharp copier machine , i cheacked the thermistor every thing is ok but the H2 err is beeping cotiniuesly , help me plz!!!!!!!!

Posted on Jun 02, 2013

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Sharp AR-5316 ERROR I have a digital copier Sharp AR-5316. It only puls a 2 and a H

Hi,
H2 : mean thermistor is defective.
to resolve this problem you have to choice if the first one didn't work go to the next one
  • do the following procedure to reset the error :-
press "R" key __ "Interrupt" key __ "C" key __ "Interrupt" key __ "14" __ " ready" key
  • If the first procedure didn't solve your problem contact your customer service center to replace fusing thermistor.
thank you for using fixya
2helpful
1answer

I have sharp AR 5316 im facing #2 or H2 error in my copier please help me and tell me what is this and what is solution for this i am waiting of your reply thank you

On a sharp machine. Press P * C * .... or # * C *. The machine should enter diagnostics mode. then enter 14 then one and press start. That should clear the issue
0helpful
1answer

Pls help for sharp copier AR-5316 error code 2-H

H2 signal is thermistor open
check the harness and the connector between the thermistor and the PWB use TC 14 to clear the self diagnostic display.
0helpful
1answer

Printer message error H2.

Fuser problem, Check to make sure fuser installed and connected. Use Sim 14 to reset. Hold the light expouser key until all lights flash and - - shows on display then enter 14 and press the copy button. Machine should restart.
18helpful
3answers

I have a sharp photocopier AR-5316 flashing error code is h4 how to reset this code and solve the problem

i have a sharp photocopier AR-5316 flashing error code is E7 how to reset this code and solve the problem
13helpful
4answers

Ar-5316 showing error ch

CH steady means cover is open. Close either front or right cover well.
CH blinking means developer unit or toner cartridge not installed. Remove and return well and firmly.
2helpful
2answers

What does it mean when h is flashing

There is a problem with the fuser unit , H2 means thermistor open or not connected, H4 means low temperature or fuser lamp not working. Reset with by pressing ; # , Interrupt , C , Interrupt. Display will go off then enter 14 and press Print key.
2helpful
1answer

My sharp AR 5316 is blicking h and then 2 please wat do i do...and pls how many copy can i make wit it in a day

An error code of H2 om a sharp 5316 indicates an open thermistor.A thermistor is a small electronic device that regulates temperature.You will need to call a copier technician.An Ar5316 operates at 16 copies per minute.Good Luck!
0helpful
3answers

Sharp AR 5316

there might be some dirt on thermistor above the heater upper roller pls check and clean the fuser unit then use simulation 14 to reset the machine enter simulation by presssing #,interrupt,c,interrupt in sequence display is then off, then no. 14 then start key h2 disappears ok
Not finding what you are looking for?

1,733 views

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

George Mclaughlin

Level 2 Expert

371 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6470 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...