Need driver for rollei bullet youngstar - Rollei Bullet HD Camera

Online from the manufacturer.

have you tried a sd card or usb card?

Your question seems to be mis-categorized under slide projectors, if you are asking about Rollei 35 SE camera, the lens will only retract if you cock the shutter with the wind lever, then press the button next to the shutter release and rotate the lens a few degrees.

http://butkus.org/chinon/rollei/rolleiflex_6001/rolleiflex_6001.htm

the Rollei projector use a europian strait tray this is a standard tray used by many manufactures.

It sounds like you just need to go to the support site for Rollei and download the compatable driver/software for your new computers operating system.

Here is a link for the new Rollei website. I didn;t see the drivers listed but that usually means you can contact them and they should let you know where to get them. The email below that is for support.

http://www.rcp-technik.com/typo3/index.php?id=rollei_de_home&L=1

[email protected]

I'm not sure if you can use any other drivers but they should be able to tell you.

Hello. Contact the folks at this link, an excellent source of Rollei parts http://www.kurlandphoto.com/?gclid=CIKfsNK6hKMCFUJx5QodikBwbA

J.

Please go to this site and order the book
http://www.camerabooks.com/Departments/Rollei/Rollei-35-Books-(New).aspx

IF THE HOTSHOE PIN ARE SAME IN CAMERA CHEEK CORD IS TTL

Hi there,
The rollei 600x mount lenses communicate to the camera via the gold plated contacts. In addition, the 350mm PQS is a medium format lens. There is currently no such adapter.