Samsung 3160fn I try to make a copy and it says ready to copy memory received and then it says not avalible, then nothing.

You have to buy a new fuser unit. They have it at these sites:


http://www.facsimile.com/main/supplies/machine_id/101134/Samsung+CLX-3160FN+Fax+Machine+Toner+Drum.html


$102.15 Samsung CLX-3160FN Samsung Genuine Brand New Fuser Unit
Fuser Unit Good for Approx. 100,000 Mono Copies or 50,000 Color Copies (JC96-04088B


http://www.amatteroffax.com/itempagey_invid_1383681_d_samsung-imaging-kit-clp-300.html


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

You will need to replace the imaging unit. It the part where the toner cartridges and waste toner tank sits. The part number is CLP-R300A. You can find it online or at your local office supply store.

Did you try to check the toner?

Try to print if the copy is lighter than before or it cant copy or print then you need to replace your toner cartridge.

Hope it can help you. (" ,)

Look for JOURNAL PRINT

1. Make sure your [RINGS TO ANSWER] settings are more than the same settings for your answering machine.
2. If someone tries to make a copy while the phone line is in use, they need to press number 1, as if telling the unit that they want one copy. If not, the unit will think you are trying to receive a fax and will interrupt the communication.

Be blessed.

Nope. I've tried everything. Feel lucky that yours doesn't jam 9 of 10 tries when copying (among other things). I'm going to take a baseball bat to mine.

that printer is sh**

Dear guys, your toner cartridge is low and as a preventive measure, the unit stores the faxes in order to give priority to copying and printing. If you are using remanufactured cartridges, the unit might not be displaying the low toner warning.

This may be obvious, but there's a "scanner lock" on this machine. It ships locked, and you need to unlock it when you receive it. Look up under where the paper comes out when you print, and on the left there's a little green switch. Make sure it's pulled towards you (you can see it also through the glass on the scanner bed).

Small slit of glass "scanner glass" needs to be spotlessly cleaned, open lid to left 2cm wide runs width of lid.

G'day from Oz