Kenmore 20.6 cu. ft. Upright Freezer 24092 Logo

Question about Kenmore 20.6 cu. ft. Upright Freezer 24092

1 Answer

Frigidaire Upright freezer with Beeping Display

Our freezer is just over a year old and it's model GLFU1767FW2. It a large upright freezer with electronic display that beeps every twelve hours. I've had so many people out to try and fix it. The display and control panel have both been changed and it still beeps. Any ideas. The red warning light is always on and the display flashes d and temp. alternating or ce and temp. alternating. Any ideas?

Posted by Grrrrrrl on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 290 Answers

First make sure you have a good 9v battery installed. If it is ok then the problem will probably be in the display board or the wiring connectors between the boards. CE is communication error. If your model has the electronic tempature control instead of mechanical thermostat the problem could be in there. My bet is a bad connection at display board.

Posted on Sep 26, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What does it mean when you get a -22 deg. and alarm beeps on an upright freezer Frigidaire model GLFU1767FW2?

https://www.repairclinic.com/RepairHelp/Refrigerator-Repair-Help

I’m happy to assist further over the phone at https://www.6ya.com/expert/david_dc2f9e0a44104720

1helpful
3answers

Lffh21f7hwa

Hello Michael - Sounds like the temperature control was accidently turned OFF. When this occurs the temperature control turns off the compressor, but does not disconnect the power to the light bulb or other electronics. Let's try activating the freezer by pressing the UP arrow until display shows "4" or desired setting. Allow 24 hours for temperature to stabilize. For future reference you can lock the control to keep from accidently changing the temperature setting. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if the unit's status has changed successfully. Thank you.
0helpful
1answer

Not getting any reading from control board on GLFU1767FW2 upright freezer

Is the compressor etc. still working? It might just be the display. I have known the display to be run off batteries rather than the pcb itself!
May 08, 2012 • Freezers
2helpful
1answer

My Fridgidaire freezer is flashing E9 , What does

http://www.frigidaire.com/manuals
go to this web site. It has lots of manuals. I found several for your unit. just enter you model number and it shows up with several choices.
Hope this is what you are looking for.
1helpful
1answer

Moisture forming on inside of freezer

is there anything that's preventing the door from fully closing( too fully)? the door gasket might be the culprit (problem).
0helpful
1answer

Frigidaire MOdel LFFU1765DW9 This is a commercial self defrosting model freezer, upright, and water leaks out of the bottom right side every so often. Why and what should I look for to fix it.

I have a frifigidaire freezer LFFU1765DW9 . it is not cold at all the light in side is on the power is on but the fan no run and the compressor is not run.

Help please
Not finding what you are looking for?

1,389 views

Ask a Question

Usually answered in minutes!

Top Kenmore Freezers Experts

Brad Brown

Level 3 Expert

19033 Answers

Steve

Level 3 Expert

3290 Answers

Pierre Laplante

Level 3 Expert

2061 Answers

Are you a Kenmore Freezer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...