Razor phone my phone is less then two weeks old and it won't play back videos or when I take pictures it doesn't make that clicking sound. Also the hinge seems to be getting loose. What can I do. Jasen

See response here: Need to unlock Motorola Razor V3xx cingular to work on Verizon

Mark
Motorola Support

I have that same problem and I need a answer but I walked in m class and the chord hit the table and it just stopped mine is about a week old also

ipod touch has a light piece of plastic on bottom where it connects to the dock youtube has a video on how to remove it softly with a razor blade and once it is removed it will work properly although to be played through stereo i must have my ipod touch 4th gen on airplane mode

Have a read of the trouble shooting guide here,
http://www.razorama.com/razor-installation-guides.html

It sounds like a fault with the charger. Test the charger output with a voltmeter to confirm correct operation. IF OK then check the wiring , fuse, switch conections between the charger and the battery.
wiring diagram is here http://manuals.monsterscooterparts.com/recreational/Razor/Wiring/

Try the procedure in this tip.

Your video card is bad.Go to My Computer-Right click-Device manager -check any yellow signin the video/sound device if any and right click then update.If this work was the driver if not change the video card.

Check your APN settings

http://www.virginmobile.co.za/support/support-category/general-services/gprs-settings-and-usage/gprs-and-mms-settings-for-android-phones/

different locations you go sometimes have dead spots so less signal wont send mms. you can also connect to your home/public wifi to send mms,

Some of their very old sets the video input was located on channels in the 90's; Try scrolling down from 99 to 90 to see if you locate the video input; this is just the way they did things in the older sets.

Before you rate this solution let me know what you find first.

SD TECH

If you are using a known good outlet and the power plug is fully inserted into the frame, your power supply is faulty.

first u change your mobile software. I think after then your problem is 99% solved if problem present u change your network ic in your mobile mostley the problem is held for network ic when network ic disconnect from your mobile your mobile gave call failed in that case u r not recive any incoming call.u change your network ic your problem is solved.