RCA P52929 52" Rear Projection Television Logo

Related Topics:

Question about RCA P52929 52" Rear Projection Television

1 Answer

RCA 52 The tv was working fine the last time it was used and now it will not come on at all. Is there a fuse or something that could have gone bad?

Posted by mandalyn1002 on

  • Gino57 May 26, 2008

    I have the same problem....the TV been working great for some time now, storm hit power went out for an hour or so. Could not get the TV to come on. Where is the fuse located or reset botton located??

  • dogrunner Dec 05, 2008

    tv wont come on at all ,when trying all i hear in the rear is a clicking noise

×

Ad

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

Fuses very rarely go bad on there own. They are there to protect the rest of the TV set when there is a short circuit and then will not damage the rest of the TV set. You could have a short in the main power supply. I'm afraid that if you do not have any solid state repair experience, this set will need to see a pro to diagnose the problem. Good Luck

Posted on Sep 05, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My RCA D52W19 HDTV Ready TV will not turn on. The power led comes on three times after pressing the button on the tv itself or attempting to power on with the remote. The condition has been getting worse...

Hi Aaron,

I just want to ask you something before I give the solution, does the unit gone to start-up problem (needs warm-up before it finally turn on, needs to pressed the power button key several times, needs to unplug from the outlet and plug it back in)before, you have said that you've encountered it last few months?

Jdvillanueva
0helpful
1answer

RCA 52" TV stopped working

It could be the problem or just a symptom of the problem. If the fuse is replaced and blows, then it's something else. Hopefully it's just the fuse. Good luck!
1helpful
1answer

The screen has gone dim

If this has happened over time, then this is not so unusual for a 5 year old projection TV. If happened suddenly then there is a problem in the video circuit. The best thing would be have a technician look att he TV. Please take a few moments to rate my answer. Thanks...
0helpful
1answer

When turning on tv picture will not come on and then tv turns off

Something on the deflection module most likely has gone bad. May just be bad capacitors in the power supply or a bad flyback.
0helpful
1answer

NO POWER

have the power supply checked it may have gone bad.
0helpful
2answers

TV wont turn on

have you checked the fuses inside the set. The power outage could have surged just enough to blow the fuse. Dont forget to unplug it when you check the fuse.
0helpful
1answer

Picture

yes it could ba the cable itself even, but i suspect more the tuner circuit or tuner itself may have bad solder connections. Here is another test for you to try, plug another dvd or vcr, or xbox etc. into the back, using one odf the inputs. See if this works like the built in dvd. if so it will be more likely bad connections in the tuner or surrounding circuit. good luck.
Not finding what you are looking for?

85 views

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76835 Answers

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Cindy Wells

Level 3 Expert

6447 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...