Question about Canon Pixma MP500 All-In-One InkJet Printer

7 Answers

Error Code 6B00

Today I got this error code after approx 1 year of use.

Posted by Anonymous on

  • 4 more comments 
  • Anonymous Sep 04, 2007

    I have been using the same cart. that I refill. I searched Google for 6B00 canon and found FixYa . Under another printer I found that many people have fixed this problem by turning the printer upside down and shaking it. Its a little awkward for a multifunction but what is there to loose? I did it and its fixed.
    Previously I tried all the common fixes as described in the manual and several I did on my own.
    I made both posts to advise anyone that gets this problem Error Code 6B00 on any Pixma Canon Printer to try this before anything else.

  • Anonymous Sep 04, 2007

    I have been using the same cart. that I refill. I searched Google for 6B00 canon and found FixYa . Under another printer I found that many people have fixed this problem by turning the printer upside down and shaking it. Its a little awkward for a multifunction but what is there to loose? I did it and its fixed.
    Previously I tried all the common fixes as described in the manual and several I did on my own.
    I made both posts to advise anyone that gets this problem Error Code 6B00 on any Pixma Canon Printer to try this before anything else.

  • Anonymous Jan 03, 2008

    error code 6B00 is shown on display and no key can be pressed

  • bebolino Aug 24, 2008

    error code 6B00

  • Anonymous Mar 08, 2009

    error code 6b00

  • Anonymous Apr 22, 2009

    Error 6B00 Problem



    Fantastic. Problem solved in 5 mins. Great advice!!

×

Ad

7 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Thank you so much.  I was getting so frustrated and finally decided to shake the printer even harder.  Absolutely AMAZING!!  Thanks again.

Posted on May 10, 2008

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Wow. Turning the printer upside down was the trick. Amazing!!! Can you believe it?

Posted on Dec 31, 2010

Ad

Anonymous

Canon MP600 6B00 Error Code: I started off removing the ink tank holder (held in place by the grey lever) and cleaning it with an alcohol solution and paper towel.  When the ink tanks are not in use they slide to the right side and rest on a pad that collects excess ink.  Mine was loaded up and gel like so I cleaned it as well.  WITH THE INK TANKS REMOVED I placed my MP600 upside down on the table with a towel underneath to protect the lid. I then gave it a few good hits on either side of the lower paper tray.  WORKED FOR ME!

Posted on Aug 26, 2008

Anonymous

It worked!!!!! At first I was shaking the printer easy and it did not fix it I said what the heck and decided to shake it extremely hard and beat on the bottom extremely hard and it fixed it!!!!!! I cannot believe this actually worked. Thank you so much for tip on this......

Posted on May 21, 2008

Anonymous

On the MP600 for Error 6B00 tape the lid down and give it a good SHAKE  it works

Posted on Apr 24, 2008

Anonymous

Unbelieveable, It does work! Forget about paying to get fixed or about buying another printer. Try this first, and please, thank the guy who posted this fix, he is saving us at least $200 bucks.

Posted on Apr 14, 2008

Anonymous

I did the same shaking thing and it works :D

Posted on Sep 18, 2007

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Riso HC5500 S01-204 error


  • Code: 001 S96
  • Description:Power supply remote signal not connected The control signal cable for the ON/OFF control of the 24/38-VDC output is disconnected. The signal wire grounded inside the power supply unit has been pulled up by the IP PCB to detect the level.
  • Code: 003 S97
  • Description:38-VDC power supply voltage error A voltage drop is detected when a voltage drop is sensed by the IP PCB based on the signal resulting from dividing the 38-VDC resistance inside the power supply unit. The detection level is approximately 18 VDC. Voltage polling is conducted at 100-ms intervals by the IP-CPU. An error is detected when a voltage drop is sensed 10 times in succession (approx. 1 sec). No detection is performed when the interlock SW is open.
  • Code: 004 S97
  • Description:24-VDC power supply voltage error A voltage drop is detected when a voltage drop is sensed by the IP PCB based on the signal resulting from dividing the 24-VDC resistance inside the power supply unit. The detection level is approximately 11 VDC. Voltage polling is conducted at 100-ms intervals by the IP-CPU. An error is detected when a voltage drop is sensed 10 times in succession (approx. 1 sec). No detection is performed when the interlock SW is open.
  • Code: 006 S97
  • Description:3.3-VDC power supply voltage error A voltage drop is detected when a voltage drop is sensed in the 3.3-VDC power supply on the MIP side of the IP PCB. Voltage polling is conducted at 100-ms intervals by the IP-CPU. An error is detected when a voltage drop is sensed 10 times in succession (approx. 1 sec).

  • Code: 007 S97
  • Description:1.8-VDC power supply voltage error A voltage drop is detected when a voltage drop is sensed in the 1.8-VDC power supply on the MIP side of the IP PCB. Voltage polling is conducted at 100-ms intervals by the IP-CPU. An error is detected when a voltage drop is sensed 10 times in succession (approx. 1 sec).
  • Code: 008 S96
  • Description:Control panel not connected The absence of the control panel unit to be connected to the MC PCB is detected. Since this configuration lacks this panel, this error indication will not be issued under normal operating circumstances.
  • Code: 009 S96
  • Description:Print counter not connected The absence of a print counter is detected.
  • Code: 011 S96
  • Description:CIS PCB not connected The connection of the CIS PCB cannot be confirmed.
HP Printer Support Phone Number 1 850 610 1013 HP Support Assistant

Dec 11, 2013 | Riso Office Equipment & Supplies

1 Answer

Code 11


Before calling service technician, open following links for Rheem troubleshooting resources including error codes.
Error codes are considered start-point for troubleshooting.
http://waterheatertimer.org/Troubleshoot-Rheem-Tankless-water-heater.html
http://waterheatertimer.org/pdf/ErrorcodeTroubleshooting.pdf

Error 11 is no ignition.
This problem can probably be solved by routine yearly maintenance shown in instruction manual which recommends: Yearly cleaning, adjustment and inspection of burner and combustion parts.
The yearly maintenance would check incoming gas supply, venting, wiring and grounding, and burner and ignition parts.
All gas water heaters today require same maintenance: tankless require yearly, and tank-type require periodic (1-3 years)

Jul 03, 2011 | Rheem Tankless Hot Water Heater...

1 Answer

Error code E141-4046


Hi we have a big problem with our Canon IPF 8100 printer. We use it since 1, 1 and 1/2 years. We print 2500 A1 pages every week.
Today the following error appeared:
Error E141-4046
Call for service
We read another post about IPF 5000 and it was written, that it is a page count error.
We entered Service Mode but we don't know what and how to reset.
P.S. the problem is that it's Sunday in our country and none of the service companies work. We have a lot of copies to print.

Please help. And thanks.

Sep 19, 2009 | Canon imagePROGRAF iPF8000 Printer

1 Answer

The Fuser is getting HOT. Error code 50.9 appears on our HP 3600N


i have a machine just like that it is normal that the fuser gets hot is a laser machine, and the part with the envelope the tracks for the paper might be worn out you said that you use it a lot check that or clean the tracks

May 26, 2009 | HP Color LaserJet 2600n Printer

1 Answer

Lexmark T642 Laser Printer error message922 02


Service fuser error requires a maintenance kit, this is approx $1000 + installed, if this is new, I would be taking it back because it shouldnt have this error. You possibly might be able tto fix it by replacing the fan in the back but thats only worked for me in approx 1 out of every 10 times.

Jan 13, 2009 | Lexmark T642 Laser Printer

2 Answers

E90 on Front load washing machine


E 90 is an error code regarding the main pc board connection.

the solution is to secure all connection to and from the main board.
tighten the sockets and make sure they are not loose that could create a problem while vibrating and shaking.

tnx 4 using fixya,

drcool

Sep 24, 2008 | Frigidaire ATF6000ES Front Load Washer

1 Answer

GE FTP18


I have the same problem, although my oven is 3 years old. I am having the door latch replaced today. cost $240. The repair company that I contacted sid that these ovens are their bread & butter!!! If I could afford it I would ship all of my GE appliances(which are only 3 years old mind you) to them and tell them to shove them!! I alreadt spent over $200 on my GE dishwasher which at the time was only 1 1/2 yearsd old.Did you clean the oven before the error code started [email protected]

Jun 25, 2008 | GE Profile JTP18 Electric Single Oven

1 Answer

Frigidaire Front Load Washer


It looks like the door switch was not making because the door is defective. Also the switch may just be bad.

Mar 08, 2008 | Frigidaire ATF6000ES Front Load Washer

Not finding what you are looking for?
Canon Pixma MP500 All-In-One InkJet Printer Logo

4,188 views

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2345 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6253 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...