Question about Wacom Graphire4 4x5

Deficient pen Hi, I am having troubles with my pen. the thing is that it seem as if it´s stuck in click. the pen didin´t fall to the floor or suffered any missuse, so i would like to know if there´s a way to solve this, whether i can disassemble my pen and how. Thanks Chago

syarman Apr 07, 2009

Same here. Stuck in perpetual click. I have the Graphire4 pen...which doesnt seem to be able to be taken apart. Anyone have any suggestions?

1 Answer

Anonymous

I got the same problem and have just solved it. I disassembled the pen and removed plastic sting that connects eraser cap and sensor (I've found that it fell down and stuck in the "click mode" when the pen was held upwards). Then reassembled it successfully. The eraser won't work, but you will get a spare sting instead :)

Posted on Oct 06, 2007

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Upload

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Heat does not blow onto windscreen but blows through other vents - whats wrong

What make an model an year vehicle do you have ? The air blows out of the floor vents an center vents but not defrost ? Possible mode actuator , stuck mode door ! There is a door inside the heater / A/C assembly that directs the air to the desired position . These doors can be moved by a vacuum operated actuator or an electric motor . Sometimes thing's put on the dash end up inside the heater box , fall through defroster vent ! Pens , pencils etc.. Depends on the make vehicle an system , manual , or automatic climate control . Some of the newer vehicles the HVAC system as it is called , the control panel is a electronic control module an can store DTC'S - diagnostic trouble codes !

May 07, 2015 | Cars & Trucks

Tip

Protecting Your Computer from Viruses

Well a computer user mostly afraid and suffers from virus attacks. Virus is the unwanted program that destroys your data and some times also damage the computer.
One of the most common ways of virus attacks is by connecting USB to your computer.
So today I will tell you some tips which can avoid or minimise the chances of virus attacks.
Always keep in mind the following points before connecting a pen drive to your computer.

1. Always use a good antivirus in your system.
2. Never open the pen drive directly.
3. before opening the pen drive, scan the pen drives for finding the possible viruses in the pen drive.
To scan the pen drive go to My Computer->Right Click on the Pen drive->Click on Scan option(Remember Scan option will only be there if there is any antivirus installed on your system)
4. if any virus found and the antivirus is not able to delete the virus, just safely remove the pen drive from your computer.
5. If no virus is found, do not double click on the pen drive to open.
Always open the pen drive by Right clicking on the pen drive and then clicking the explore i.e.:
My Computer->Right click on pen drive->Click on Explore
6. Always beware of copying the unwanted files on your computer. Just copy the file which you want. Never do a select all, copy all thing. Just copy the item you wanted, and paste into your computer.
While pasting the data you should never paste it on C drive (Drive that contains your operating system). Always copy data in a separate drive then C drive.

So these are some small steps which can be very useful to avoid virus attacks...

Regards,
polysandy

on Apr 12, 2010 | Computers & Internet

1 Answer

Camera was dropped on a wood floor by a friend. The lens was stuck closed after that, but repaired by a friend. Now the picture quality is horrible, with lines throughout the picture and the coloring is...

Only a qualified Canon technician can answer that.
To me it seems your camera may have suffered a terminal injury.

Jun 28, 2011 | Canon PowerShot SD600 Digital Camera

1 Answer

My bowflex dumbells are jammed and i cant remove them from the holder

Hi I called 1-800-628-8458 (the number in the manual) after trying several of the methods shown here. None worked. your dumbbell needs to be on a flat surface, no roll the dumbbell over to where the weight is facing the floor and the base is up in the air. With both hands lift the base and gently shake, the weight should fall out. Put the base back on the floor face up and inspect the grooves where the weight plates go for any debris. Clean this area if you find debris. Now you will need a pen or pencil with your weight. Grab your weight, still facing down and you will see a black release button on both sides on the inside of the weight. It is in between the metal dial and the inner part of the weight. Now press down on that button with your pen or pencil and start turning the dial (caution: the weight plates are going to fall out) keep turning until all of the plates are out. Do the same thing for the other side. Now grab each plate and put it back on the base where it goes, the smallest plate on the outside to the largest plate on the inside, make sure the small metal piece on the bottom of each plate is facing away from the inside of the base. Do this for all of the plates. Now back to the dumbbell. Grab your pen or pencil again and press down on the black release button and turn the dial to where the number 5 or lowest weight is selected where it reads Bowflex. Do this for both sides. Now grab your dumbbell and carefully put it back into the base. It is important that you put the dumbbell down straight, avoiding any shifting in plates.

I hope this helped.

Dec 21, 2010 | Bowflex Selecttech 1090 Dumbbells

2 Answers

Pen keeps drawing when I lift it off tablet

This problem commonly occurs due to a stuck "nib" sensor (the sensor that detects pen pressure).

Take out the "nib" (important, so the sensor isn't damaged further) and whack the pen on your desk (or drop it on the floor from 3 feet up). It re-seats the "nib" sensor when it's stuck. If this doesn't work after multiple attempts, then the sensor may be too damaged.

Nov 28, 2009 | Wacom (EP130EPE) Digital Pen

2 Answers

Pen sticking

In settings, turn Tip Feel all the way to maximum Firm.
Does this help?

Jul 16, 2009 | Wacom (EP130EPE) Digital Pen

1 Answer

Icemaker makes tons of ice and it spills all over the floor

The icemaker should have a thin metal arm that turns it off when the arm is raised, and on when the arm is lowered. This is so when the tub of ice gets full, the cubes push the arm up, and the icemaker is turned off to keep from making excess ice.

When I had the overflowing ice, I checked my icemaker and found that the arm had fallen off (and thus the icemaker won't know when to stop making ice). I found the arm and stuck it back on, and all was well. It may be a bit tricky, and it might take some ingenuity to keep the arm from falling back off.

I hope this helps!

Sep 29, 2008 | Kenmore 73503 Stainless Steel Bottom...

2 Answers

Intuous pen "sticking"

Take out the "nib" and whack it on your desk (or drop it on the floor from 3 feet up). It re-seats the "nib" sensor when it's stuck. If this doesn't work, then the sensor may be too damaged.

Sep 18, 2008 | Wacom (EP130EPE) Digital Pen

1 Answer