- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Usually a flashing power light on a rear projection TV means a bad bulb, try replacing the bulb. Also try unplugging it for 10-15 minutes, then come back and plug it in and try again. Also if its been a long time since its been serviced it could be dust buildup causing overheating, do you hear the cooling fan running? It could also be a failed cooling fan. Generally the first thing i do with projection TV's is clean them, clean all the vents, pull the bulb out, clean out the cooling fan and bulb housing, and then try a new bulb. If that doesn't fix it then its a bigger internal problem and there is no quick fix but have it serviced.
6 blinks on your model means the +5V line is either overloaded or shorted on the A or B board. You can get replacement boards at the following link and they will assist you in determining which board of the two you actually may need. http://servicemanuals.vstore.ca/
If your tv is Sony KP-51WS510, then it has problem in convergence ICs or Board and needs to be replaced. Best Buy has no idea about Bulb, this TV is 3 CRTs rear projection system and has no Bulb or Lamp inside. Need further help, let me know.
8 blinks in that model means High Voltage Error which means the flyback is defective and will need to be replaced. Sony parts list it as no longer available. But you can get it at the following link for 129.95 and it comes with free instalation instructions. the job takes about 45 minutes from start to finish. Heres the link. http://servicemanuals.vstore.ca/
its the horizontal deflection has stopped the q5006 on the D board is broken or else ic 452 is faulty on the A board if you need to know where you can order these parts let me know and I will post a link also they offer free tec advice
It is really hard to say what could be your problem, so let me know exactly what it is -Does your set play-and has no sound and can you go into menu to audio?let me know i will try to help you.Thank You for using FixYa and Have a Nice Day