How do I change the time on my JVC KD-G230 stereo?

Get the harness for your car. Any local stereo shop will have it. Also pick up the dash mounting kit. It will have the instructions to take your dash apart.

The cord you are using is an audio cable with a 3.5mm plug with two black bands on the plug. The JVC Source button has to be pressed until AUX shows in the display. The volume on the iPod AND the volume on the deck affect the sound - turn the iPod up to 70% volume for best results.

the battery probley shorted out your deck i think its time for a new one

First you need to get a wire harness for the Chevy (check Ebay) then follow the wiring instruction inside the package on how to join the spliced wires togother. After joining the wires togother plug the harness in and stuck the JVC into the recess where the old stereo was and thats it, it should play if not you don`t have a good ground, ground the body to the frame.

This is a link to JVC for your KD-G230 manual. Look on page 3 under General Settings -- PSM.
http://resources.jvc.com/Resources/00/00/91/GET0408-001A.pdf

GO TO THE LINK, THE INSTRUCTIONS ARE IN THE PDF FILE.

http://resources.jvc.com/Resources/00/00/91/GET0408-001A.pdf

Check out this pdf http://resources.jvc.com/Resources/00/00/91/GET0408-001A.pdf

parece ser un problema de ic del tuner te toca cambiarlo

Pero tiene la figura de bluetooth

How to change clock on a JVC KD-G230????