Brother MFC 420CN All-In-One InkJet Printer Logo

Related Topics:

Question about Brother MFC 420CN All-In-One InkJet Printer

1 Answer

Need roller for printer feed or pickup

Where can I get parts for my printer at?

Posted by prog on

Ad

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 832 Answers

See brother.com There should be a list of service partner. Contact those and ask for the spareparts you need. They can sell them if they want to.

Posted on Sep 11, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What are the causes of jaming

Jams are most commonly caused by worn rollers in the paper pickup area. One roller is in the tray and there are two rollers in the body of the printer above the tray. The blue rollers are the feed and separation rollers, the while body roller is the pickup. You can try cleaning them with a damp cloth but depending on page count they might be too worn. Part numbers are Pickup roller RM1-0036 and feed/separation rollers are RM1-0037. If the printer makes a lot of noise when printing then it is possible that the fuser drive is worn and causing slipping.
0helpful
1answer

How to replace pickup rollers

This should help. Good luck !

Cassette (Tray 2) paper pickup and feed rollers

To remove the paper pickup and feed rollers

1 Remove the cassette.

2 Locate the two rollers on the bottom of the paper pickup unit (above the cassette). The pickup

roller is the smaller roller, and the feed roller is the larger roller.

3 Pinch the tab on the end of the cassette pickup roller (callout 1), and pull the roller out.

4 Pinch the tab on the end of the cassette feed roller (callout 2), and pull the roller out.

Figure 6-24 Removing the cassette pickup and feed rollers

Note Always replace the cassette pickup roller and the cassette feed rollers at the same time. Also replace
the separation roller (located in the paper cassette) when replacing these rollers

0helpful
1answer

Hp laserjet 4250 feeds multiple pages through the manual feed tray

Hello,

It sounds like the paper pickup roller and separation pad for tray 1 is worn and will need to be replaced. These two parts pickup the paper and weed the pages into the printer. When they get worn down they can grab more than one page at a time. The parts are user replaceable, no need to pay a big repair bill for something like this. The parts come in a kit with rollers and pads for tray 1 and tray 2 along with the instructions and it is available here:
http://www.ccl-la.com/catalog/product_info.php?products_id=302
Here is a picture of the roller and separation pad from the service manual.

42f23580-6805-4c92-bce3-6bead3056881.jpg
I hope this helps you out.
0helpful
1answer

Blank pages when printing

Altinis:

Remove the paper tray and look up into the paper pickup area. The roller there is the paper pickup roller. Under the paper pickup roller is a paper double-feed prevention pad. Take a "Q-Tip" dipped in alcohol and clean both the paper pickup roller and the double-feed prevention pad. That should prevent the paper double-feeds that you are experiencing.
0helpful
1answer

Dell 1600n pickup roller issues

The1600n pick up roller part number R5375 is probably cracked and otherwise in need of replacement. They cost about $20 - $50 from various sources. Try ebay and Amazon.com first.8_1_2012_11_46_03_pm.jpg
2helpful
1answer

My hp laserjet 4015 is displaying an error 50.3 after printing smarged copies

Thank you for contacting FixYa with your printer inquiry.

The 50.3 is a fuser Temperature error. If your pages have toner and image but are smudging or smearing you know the fuser is not heating and needs to be replaced.

If your printer is still under warranty contact HP Customer Care for warranty replacement of fuser part numbers: RM1-1082 for 110 volt, RM1-1083 for 220 volt. (888) 999-4747.

If your printer is out of warranty, suggest you purchase a maintenance kit part # CB388A HP maintenance kit for LaserJet P4014 P4015 P4515, includes other needed high wear parts.

Excellent Illustrations:

http://www.printertechs.com/tech/mkinst/P4015/mk-p4015-2fuser.php



Maintenance Kit Contents:

Contents

1. What is included in a LaserJet P4014 P4015 P4515 maintenance kit?

2. Fuser installation.

3. Transfer roller installation.

4. Cassette feed/pickup rollers.

5. Tray 1 (manual feed) pickup rollers/feed rollers.

6. Reset the maintenance count.



Please rate this solution and post a comment if you need additional assistance.

0helpful
1answer

HP Business Ink-jet 1200 1) when it starts printing and the paper feeds it makes an extremely loud clunk sound regardless of the paper tray being used. 2) each and every time the paper comes through it...

The pickup roller is problematic. First clean, then replace if necessary.

The part should be under $20.

To replace (from HP Support):

1. Unplug the power cord from the
printer, and allow the printer to cool.

2. Open the toner cartridge door, and
remove the toner cartridge.

3. Locate the pickup roller.

4. Release the small, white tabs on
each side of the pickup roller by
pushing them away from the roller,
and then rotate the pickup roller
toward the front.

5. Gently pull the pickup roller up and
out.

6. Position the new pickup roller in the
slot of the previous pickup roller.

Note Circular and rectangular pegs on each
side prevent you from incorrectly
positioning the pickup roller.

7. Rotate the top of the new pickup
roller into position until the white
tabs on each side of the roller snap
the roller into place.

8. Reinstall the toner cartridge, and
close the toner cartridge door.

9. Plug the printer in to turn it back on.

Hope this helps.

0helpful
1answer

Manual feed pickup

replaced the manual feed tray separation pad (it is right under the pick-up roller). The HP part # is RG5-2703. First remove the pickup roller then you can pops it out with a small straight slot screw driver.
0helpful
1answer

Dell 1700 Transfer Roller

These series printers have a typical problem of the paper pickup rollers wearing out resulting in jams, crooked feeds and partial feeds. a quick fix:

take the paper tray out, turn the printer on edge and locate those two rubber roller bands on the pickup arm. Peel them off, flip them inside-out and return them to the rollers. This restores thier sticky rubber side so the papper feeds properly.

Now if you are a heavy printer, you can order some of these from dell for the next time. Washing these in handsaop and water works sometimes too. never use alcohol.

1helpful
9answers

The printer takes all the papers in but prints on one how can i make it take one pagg at a time

you will need som of these rollers: Paper feed Roller Ass'y part No: RM1-0037-020 Paper Pick-Up Roller ass'y Part No: RM1-0036-020 Google the part number and you should be able to find a local dealer of them
Not finding what you are looking for?

26 views

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6470 Answers

Gary
Gary

Level 2 Expert

301 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...