Computers & Internet Logo

Related Topics:

Posted on Sep 03, 2007

Hardware not detectable

I am usling a VIA lan adaptor 823x wich is attached directly to the motherboard(pm800-m2) it is not being detected by hardware wizard and when i try instaling the drivers manualy i get the error saying the device cannot start. i have no idea how to set it up or get it to be detected. i am trying to connect it to an external modem for use with dsl service and all i can get to work is dail-up through a diff modem.

  • 2 more comments 
  • Anonymous Dec 01, 2007

    same problem

  • Anonymous Jan 29, 2008

    same problem

  • Anonymous Feb 06, 2008

    i need the driver of this produt

  • djbenny May 19, 2008

    jesus i can't get anywhere with the hp i buy i got a Pentium d and i have no sound drivers and network adapter i have one network adapter but it is connected on the motherboard but can't get a driver for it please help


1 Answer



You have to go to the bios to see if the card is activated ii first, if so, you can go to

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Need a manual for pm800-m2 motherboard

Hello Gerard, my name is Arman (online alias: thedrain)

Attached in the below hyperlink is the manual that you are looking for...


What kind of ram does the pm800-m2 rev:1.0 motherboard take


Each memory slot can hold DDR PC2700 or DDR PC3200 with a maximum of 1GB per slot.

Here is the full info you need for your motherboard:

PM800-M2 Info

Thanks for using Fixya. Please take a moment to rate this solution.

I need to download drivers for motherboard ECS PM800

Take this link to via and make the necessary selections from the pull down menus to get your desired drivers.

What driver do I need to get my audio working on a PM800-M2 Rev: 1.0 Motherboard

you will find all the divers for you motherboard at the link above. install all the drivers : the one for the chipset first and the others after. If the board is ok and nobody had played with the jumpers on it you should get your sound.

I can detect no SATA' HDD

The ECS PM800-M2 only supports SATA 1.0 hard drives. If you are using a newer SATA 3.0 hard drive, there is a jumper on the hard drive which has to be set to SATA 1.0 in order for the VIA 8237R chipset southbridge (which Is on your ECS PM800-M2) to recognize the newer SATA 3.0 hard drives. This Is applicable to all motherboards with the Viatech PM800 / 8237R chipsets. Note: the location for the SATA 1.0 / 3.0 jumper varies on each brand of hard drives. Also check If SATA Is enabled In the BIOS and select IDE mode.

There are no any drivers about via m. boards forlinux

U can find via drivers for most of the os including many distributions of linux here

Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6691 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides