1997 Chevrolet Cavalier Logo
Anonymous Posted on Aug 09, 2013

Thanks Pete!! Changed plugs and Bessie runs like a

Thanks Pete!! Changed plugs and Bessie runs like a top!!!!!

1 Answer

A

Anonymous

I thought you had code issues to work out.
I guess you had a PO 300 code & got lucky
or just started with changing old plugs first,
to catch up on preventative maintenance
Seldom do spark plugs fix much unless they
are really worn or stressing the ignition system

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
2answers

Berlingo 2013 van blower only works on 4. Have changed the resistor without success. Any ideas? Pete

Switch has probably open circuited on the lower speeds due to high resistance, 4 draws less current
0helpful
1answer
0helpful
1answer

I have a 92 Honda accord it'll turn over but it won't start and it was just running last night

Bessie, you'll need to do some good ol' fashioned troubleshooting. You need to establish that the vehicle is getting both IGNITION SPARK and FUEL. When you figure out which the vehicle is NOT getting, you can begin to troubleshoot from there.
0helpful
1answer

Pontiac Montana SV6 engine chugs at 80 Kms

It is usually coming from the spark plug wires( leak spark). Spark to ground or piece of metal.
To find out exactly take an empty spray bottle fill her up with water and add 2 tablespoons of salt. With the engine running a light spray of the mix on spark plug wires you will see the spark leak and proof the spark plug wires have a defect. if so replace all spark plug wires that should solve your problem.

Hope it helps.
0helpful
1answer

My mazda 626 lx 1995 runs very slow since i made the oil change.i also changed the air filter and the plugs. Now when i make a stop and try to accelerate again it takes time to catch up. what could be the...

Hi you know when you changed the plugs did you make sure that the little cap was screwed on properly on top of the plugs, this is the part the plug lead pushes onto, check this as it seems this could be your problem.

other possible causes could be loose plug leads, wrong spark plugs

first check the little nipple on top of the plugs is tight then let me know what you find ok

plz rate this solution as i have a whole page of unrated posts, thanks
0helpful
1answer
0helpful
1answer

I have a driveability issue when you step on the gas it just creeps along very slowley it wasnt staying running but i replaced the iac valve and the t/p sensor they were used.It idles now but when step on...

You may also have to check the MAP sensor at the intake. Fuel mixture may be incorrect. Also check the status of the spark plugs if it is fouled or soaked in gasoline.
0helpful
2answers

Surges when idling and GDI eco sign on dashboard

sent it to a garage to repair, dont know what they did thanks pete
Not finding what you are looking for?

63 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...