Question about Baumatic 23 in. BDW4SS Built-in Dishwasher
I have a baumatic bdw2ss dishwasher, when the machine is turned on all the lights come on and the cycle won't start
SOURCE: cycle will not start
sounds like your machine is not taking in any water at all, which is the first thing the dishwasher wants to do on all programme settings.The constant whirring noise you refer to will be the water valve trying to take water into your machine.As yours isn't filling in the first place the programme cannot progress without water and it will just sit there whirring.Anyway, to resolve this matter I would check the fill hose which goes from the back of machine to your cold water pipe in your kitchen/utility, in case somebody has turned off supply.where the flexi hose meets the copper supply pipe there should be a thumbturn shut/open valve, turn this 90 degrees or a quarter turn and if you here a rush of water for a split second then you have fixed it.At this point try setting away a programme to see if water is going into dishwasher. If not have a bucket ready and unscrew the flexi hose altogether to make sure water is travelling past shut/open valve.If not you need a new shut/open valve.If water is able to pass this valve reconnect to dishwasher turn shut/open valve a quarter turn to open flow of water again,test machine on any programme again ,if it fills then your sorted, if not it must be your dishwashers internal water valve that will need replacing.Not a major job (located behind fill hose) but make sure electric and water supplies are off first before dabbling and write down your machines make and model number before shopping for part. GOOD LUCK.
Posted on Aug 15, 2007
Tips for a great answer:
Aug 30, 2014 | Baumatic Dishwashers
May 27, 2010 | Baumatic 24 in. BFD60SS Free-standing...
Apr 26, 2010 | Dishwashers
Mar 05, 2010 | Baumatic 23 in. BDW5 Built-in Dishwasher
Aug 09, 2008 | Baumatic Dishwashers
104 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: