Hard drive and power cord

MyVolts 12V Power Supply Adaptor Replacement for Iomega ...

https://www.amazon.ca > MyVolts-adaptor-compatible-...
About this item · This 12V high-quality power adapter is compatible with the Iomega LDHD-UP External hard drive. · The plug fits a US 2-pin wall power socket.
Batteries included: ‎No
Connector type: 2-Pin Rating: 4.4 · ‎47 reviews · ‎$29.34 · ‎In stock

• 
  

  MyVolts 12V Power Supply Adaptor ... - Amazon.ca

  https://www.amazon.ca > Iomega-Prestige-External-repl...
  This 12V high-quality power adapter is compatible with the Iomega Prestige 1TB External hard drive. The plug fits a US 2-pin wall power socket. This power ...
  Hard Disk Size: ‎1 TB
  Connector type: 2-Pin Rating: 4.2 · ‎12 reviews · ‎$21.73 · ‎In stock

HQRP 12V AC Adapter for Iomega 1TB External Hard Drive ...

https://www.walmart.ca > HQRP-12V-AC-Adapter-for-I...
Buy HQRP 12V AC Adapter for Iomega 1TB External Hard Drive HD Adaptor Power Supply Cord [UL Listed] + Euro Plug Adapter from Walmart Canada.

Iomega External hard drive LDHD-UP Compatible Power ...

https://myvolts.com > product > Iomega_External-hard-...
Iomega External hard drive model LDHD-UP compatible power supply adapter charger.
US$16.49 · ‎In stock

The Casio support site says the power cord for that model is officially discontinued... but you could try eBay (ugh).

I recommend a 'universal' power adapter (typically $12 to $20) that has different tips and power levels. I use these things all the time on older devices without any problem (cordless phones, electric keyboards, radios, etc). Get them at Radio Shack, Best Buy, Lowes, Home Depot, etc.

On your current adapter, look at the 'brick' part and it should tell you the OUTPUT volts you will need to set the universal adapter at (usually 9 or 12 v). This info may also be printed on the boombox itself, near the power jack (you may need a flashlight and good eyes to read it!)

I am not recommending any particular model, but here is one example:

Amazon.com power adapter

Amazon UK has the adapter: http://www.amazon.co.uk/LDHD-UP2-MDHD500-UE-MDHD320-MDHD500-U-External/dp/B007487VPI . There is also few sellers on Ebay with the power adapter. One vendor is: http://www.ebay.com/itm/AC-Adapter-For-Iomega-LDHD-UP2-MDHD320-MDHD500-U-Hard-Drive-HDD-Power-Supply-PSU-/350600202608 .

I hope this helps.

Cindy Wells

The data can be retrieved once the drive gets power. Secondy for the replacement of the outlet or the whole drive you need to check with your vendor if its under warranty then you can get the entire drive replaced instead of the cord else they can suggest better..

Hi annabel_nyc,

You need to make sure that you get a compatible power adapter for that model. Most of Acomdata external drives use a 12v adapter, but not all. If you plug the wrong voltage into the drive, you do have the possiblity of frying your external. I'd check with your manual or post back your model number so I can look that adapter up.

Good Luck

Mark

open plastic case and pull out the sata hdd and put it in a comp with sata support

What Make and Model is it?

Try the manufacter's site, or ebay

Although not sold at Best Buy™, there are available adapters/cables to make this transfer possible. I recommend using a search engine to find "firewire to usb." Hopefully this will give you the results you need.


Rhiecksboy

Any 12 volt dc 750ma+ power adapter will work.Install the right plug on the end for your external drive. You can go to radioshack and they will have the proper end for your drive. You have to make sure the polarity is right though as it's direct current. The tip or center must be positive. I recommend testing this with a volt meter before plugging it into your drive to ensure proper polarity. I hope this helps you.

George

You can buy a universal adapter. It works 99% of the time on all harddisk housings.