Unsupported card when you turn the camera on an try to look at the pictures they won't show,and then it says unsupported card.

Look at the memory card. SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

Try NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Consider NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.

You have to change the 'storage' to 'memory card' or 'external card' from 'internal memory' or 'camera' using the camera menu.

Make sure you're using an SD card, 2GB and smaller. The M407 won't work with higher-capacity SDHC cards.

The M415 works with SD cards. Your 4GB card is actually an SDHC card and won't work with the camera. You need to use SD cards, 2GB and smaller.

Hi, you need to format your memory card to suit your camera. You can do this by following the instructions in your manual. This is a simple step and make's your memory card "compatible" with your camera. the option will be somewhere in your camera's settings.

Regards

Muzzi_123

Make sure you're using an SD card, 2GB or smaller. The M407 does not work with higher-capacity SDHC cards.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

Hi - You can download the manual by clicking the link underlined in blue below:

Photosmart M415

See page 166:



Also try formatting the card in the camera as cards that have been used in other cameras or formatted on a PC may not work correctly until formatted in the camera.


Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

You might want to try a different memory card.