Question about Zenith C32V37 32" TV

TV picture doesn't work

The other day I was watching TV, and heard a pop. My tv now doesn't have a picture, but it does have sound. I'd like to note that for the past two years, the TV made a high pitched sound all the time. Any idea of what's wrong with it? Should I buy a new tv or can I get it fixed? Thanks!

TKMAN Dec 26, 2007

the flyback transformer is bad per my TV repairman. He is telling me he cannot get the part. He said that the manufacturer can not provide us with the appropriate replacement part. I read on the related item that they found the part for $31.90, this was postede 10/22/2007. Where did they find the part?

1 Answer

Anonymous

That sounds to me like a flyback transformer went bad. I just had this issue because the ceramic coating on my flyback cracked and caused it to arc off. I got a new one delivered for 31.90 and soldered it in and viola! Perfect 32" tv once again.

Posted on Oct 22, 2007

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

I heard two popping sounds and now my television will not power on.

A popping sound as you describe sounds as if your tv blew a couple capicators on the main control board. More than likely , you are needing to aquire a new main circuit board.

Sep 01, 2014 | Samsung UN55B8000 55 in. LCD HDTV

1 Answer

Sound but no picture,black screen hitachi#50GX30B Was watching Tv then I think I heard a little pop and no picture just sound

hi voltage transformer went need a professional to fix unless you can get parts and solder it in

Mar 27, 2014 | Hitachi 57F710 TV

1 Answer

Heard pop sound picture went

Your backlight went out. Manual should tell you how to change it

Oct 16, 2013 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

My Vizio p50hdtv herd spark, and TV went black, no picture no sound

Check and replace the main power regulator board as card basis. It has damaged.

Oct 11, 2012 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

I was watching my Hitachi 42hdm12 and heard a pop and now the picture won't show up or sound or anything?

A pop is usually a power surge and you blew a board. If you take the tv apart, if this is it, it will be evident by the burn marks. You could have burned out the internal power supply as well.

Oct 04, 2012 | Hitachi P50H401 50 in. Plasma HDTV

1 Answer

PH-50T18 Prima The picture doesn' twork. Sound works. any suggestions

There is a power supply failure and this might need attention of a qualified service technician

Jul 11, 2012 | Televison & Video

1 Answer

Pop sound then no picture, just sound

I assume this is a plasma TV? You will have a fuse blown on either the Y or Z sutain board, there is also a possibility one of the driver IC's has blown on the buffer board, this will shut down the screen & leave the audio working normally. You can check these boards which sit on the left & right hand sides of the screen.

Sep 23, 2009 | Televison & Video

1 Answer

Picture started getting fuzzy then it went out

yes,remove the back of the tv,on the power board you will see the problem.replace those capacitors on the power board.this will allow the set to work.the black bars may still be there.this is an indication of a bad panel.

Aug 08, 2009 | Televison & Video

1 Answer

My vizio P42 went "pop" black screen with sound, any ideas?

Your TV mainboard is damaged and need to be replaced, the price should be around $80-190 and you can do it yourself.

Jun 06, 2009 | Vizio P4221 Television

1 Answer

No picture or sound on some channels

we cannot get a picture or sound on several channels. Otherwise the TV works fine. Any solutions? as you get p&s on several channels so your ser is ok the problem 1 loose contact near tuner or it is defective. 2 tuner signal line .

Sep 16, 2007 | Toshiba 20AF44 20" TV