At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have the same problem. The Sync DSL light keeps on flashing. According to the 3Com and Singtel, they both blame one another. From my understanding, the modem is not receiving and internet signal at all. Can anybody help. I have tried everything. Change to a better filter and cable , still no internet. Thks. I have the same problem. The Sync DSL light keeps on flashing. According to the 3Com and Singtel, they both blame one another. From my understanding, the modem is not receiving and internet signal at all. Can anybody help. I have tried everything. Change to a better filter and cable , still no internet. Thks.
You can't post conmments that contain an email address.
What do you mean by no connect? do you mean no sync DSL light flashing or not getting an IP Address, or not routing through the network? please explain.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Open your browser and enter the 3Com URL configuration address http://192.168.1.1
Then go to the Menu Screen and select Reset to Factory Defaults.
When to change the rouer's wireless settings then you will also need to apply these changes to your wireless card in the computer so it can connect to the 3Com router.
For 3com type of routers, you must connect firstly to 3com setup, By:
First: open your browser and type 192.168.1.1
Second: you will find adapter setting and reset it, it all depends upon your router's software.
Third: the easiest way is to reset it from the small button in the back of your router.
Unless, you can try another computer to connect or there is a tiny (and I mean sometimes pinhole) reset button to push, it may have seen its last day. It has happenned to me and I picked up a little 35 dollar Belkin that worked great.
I am pretty sure what you have is an ethernet hub..not a wireless router. It would be used as a distribution site for a shared network. The BNC port is a connection for coaxial cable.
undo the dmz and forward the ports 22 for ssh and any other services you need to the cisco. Ok dmz is not good... 3com calls port forwarders virtual servers just add what you need there... hope that helps.
I have the same problem. The Sync DSL light keeps on flashing. According to the 3Com and Singtel, they both blame one another. From my understanding, the modem is not receiving and internet signal at all. Can anybody help. I have tried everything. Change to a better filter and cable , still no internet. Thks.
×