Cant figure out how to use fax

You may download a copy of the manual at Product Support Dell US

Manual feed instructions begin on page 38.

Bidirectional Printing - A means of printing by a computer printer which prints one line from left to right, then the following line from right to left. Such printing is faster than printing in one direction only, as there is no need to wait for the carriage or other imaging mechanism to return to the left margin before starting a line.
how to enable bi-directional printing.here's how:

1. -click on start
2. -click on printers and faxes (control panel->printers and faxes)
3. -right-click on Dell Photo All in One Printer 964 All-In-One icon
4. - click on properties
5. -click on ports tab
6. -down at the bottom there's a small box before bi-directional support
7. -tick the box to enable it then click apply,ok
8. -try printing again

note: in vista , printers and faxes is printers.in win 7 ,it's devices and printers.
and properties in win 7 is printer properties

Try...

Troubleshooting Printhead Problems on the Dell AIO V313w, V515w, V715w, P513w, and P713W Printers

and

Cleaning the Printhead on Dell AIO V313w, V515w, V715w, P513w, and P713W Printers

Before reseating the cartridges, shake them to loosen the sensor.


Rick

Hi,

Better would be to delete them and update again. Else, try using the opensource driver installtions available.

Regards,
HP

1 Click Start →Programs or All Programs→Dell Printers→Dell Photo AIO Printer
964→Dell All-In-One Center.
2 From the Dell All-In-One Center, click the Maintain/Troubleshoot tab, and then click
Display the Printer Setup Utility.
Printer Setup Utility Tabs
On this tab: You can:
Send • Enter your name and fax number.
• Select a maximum send speed and a print quality for outgoing faxes.
• Choose whether to scan the entire document before dialing the number.
• Choose whether to use error correction.
• Select when to print a fax usage report.
• Select when to print a fax activity report.

this information is from the manual found here
http://support.dell.com/support/edocs/systems/PRN964/en/om/om_en.pdf

I hope this helps

Your printer has a pending jobs to print. Go to printers and faxes. Double click your printer delete all pending jobs.

A list of HP aio error codes:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu02549&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN

You could try running the Fax test. Press setup > Tool> Run Fax test.

This will give you instructions about what you need to check and what you need to do if it failed on some of the tests.

Then try to send a fax to the HP fax test server detailed below:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00259105&cc=us&dlc=en&lc=en&jumpid=reg_R1002_USEN

i reinstalled the driver

got your e-mail asking me to post how i fixed my 924 printer. well you post how you wpuld have fix it then ill post mine

we cannot figure out why the fax/copyer always prints things out very light you cant see any thing that gets printed out on it