How to cut suffix and prefix from a barcode - Motorola MC9190-GST

User Manual
http://www.honeywellaidc.com/CatalogDocuments/VG1200-UG%20Rev%20E.pdf
Chapter 5
To Add Data Prefix or Suffix

Compose does not have a suffix. It may be considered to have a prefix, which would be "com-". Com- as a prefix usually means "together."

Hello Severiano,
this can be done automatically, just by scanning three programming barcodes. Please follow the steps in the attached document. https://docs.symbol.com/attachments/ADC-01244.doc

Hi

If you have the user guide then go to the page 48(4.3) there all option available, To clear the perfix and suffix, other wise download the user guide to Click hear

Hello Norma, you can use the suffix or prefix to send characters, which are not included in the barcodes tgehter with the scanned barcode data.
If you dont need any character before or after the data, you can leave it blank.
It is usually used to add an Enter or Tab to switch to the next line, while scanning to some application like excel.

Have a read through this document.
http://www.modul-bio.com/media/Symbol_LS2208_Manual.pdf

look at 13-4

have you tried scanneing the enter barcode after 6 ?

The link works for me DataWedge provides a convenient mechanism for non-scanning aware applications to receive data from embedded or connected data capture devices. It allows the user to capture data into any application that accepts keyboard input. It supports four types of Data Feeds: Barcode Scanners, RFID Tag Readers, MSR Readers and Serial Data Input. It provides user with text/hex data formatting and prefix/suffix facilities. Description

1. New Test and Log Display.
2. Improved DataWedge Startup Time for MSR and RFID
3. Gen2 RFID Support
4. Device enable/disable persistence over cold boot
5. Virtual Key Support in Prefix/Suffix
6. Performance improvements for MSR
7. Enable Serial Interface on startup
8. Support added for Event based Serial reading.
9. Delays regarding RFID are fixed.
10. Several Barcode character mapping issues fixed.

make sure some security software is not blocking your access

this are all barcode to solve u r problem.......


please tell me how to set prefix /suffix values ?

i have already set scan prefix & scan sufix and then scan option ...
but did not get the< prfix ><data>< suffix> only data will retrive...
prfix value is `key, suffix value is Tab !

please help me

Prefix/Suffix Dialogs
The Prefix/Suffix Dialogs allows configuration of DataWedge options.
Two data entry fields are used to display and allow entry or editing of prefix and
suffix strings. The prefix string, if present, is transmitted before the data for any
barcode scanned. The suffix string, if present, is transmitted after the data for any
barcode scanned.
The following checkboxes are used to display and allow modification of various
DataWedge options:
Allow escapes in prefix/suffix (default = disabled)
Enabling this option allows escape sequences to be embedded in prefix and
suffix strings. Escape sequences allow non-textual data to be transmitted as
part of the prefix or suffix string. All escape sequences begin with the backslash “\”
character. The supported escape sequences are:
\b Backspace
\f Form feed
\n New line (line feed)
\r Carriage return

you have a "suffix" programmed into the barcode scanner. this is a common feature and allows for auditing (like a user signature) these can be removed, The code book should have pages of option programming barcodes, in which you should be able to find a section on programming prefixes and suffixes, there should be a control barcode which clears all suffixes. This should solve your problem