Not able to install web camera

1. From your Home Screen, Tap Safari. Type http://iapnupdateatt.straighttalk.com. Tap Go

2. Safari closes. Install Profile opens. Tap Install. Tap Install Now

3. Tap Done. Safari reopens.

4. Turn your iPhone off. Turn it back on. Make sure you turned the power off, not just put it to sleep.
5. After restart, Tap Settings->WiFi->Off

6. From the Home Screen, Tap Safari


7. Load a web page. Use a page other than Google. Google may be cached

8. After confirming data works, re-enable Wi-Fi
If your data works, congratulations! If you only need data but not MMS picture messaging, you are done. If you want MMS, continue to Method 2 - Configuring Both Straight Talk Data and MMS for iOS 6
What to do if your data doesn't work? If your data connection isn't working. Try the other Carrier APN profiles from the Straight Talk web site. You can only have one APN profile installed at a time. Each time you want to install a new profile, you need to remove the old one first.
9. Tap Settings->General ->Profile

10. Tap Remove. Tap Remove.


11. Go back to Step 1. but try this URL: http://iapnupdatetfdata.straighttalk.com/
12. If data still doesn't work. Go back to step 1. but try this URL: http://iapnupdate.straighttalk.com/
13. If you have tried all three Straight Talk Carrier APN profiles and your data still doesn't work, try the Straight Talk profile from the unlockit.co.nz web site.
14. From your Home Screen, Tap Safari, Load http://unlockit.co.nz

15. Tap Create APN
16. Tap Country. choose United States. Tap OK.

17. Tap Carrier. Select StraightTalk. Tap OK

18. Tap Create APN.

19. Tap Install. Tap Install Now

20. Tap Done

Repeat steps 4-8 to test your data connection.

OK here is my suggestion for you. First disconnect your camera from your computer. Then go to logitechs official web site. The link is below and will take you there. Either click on the link or copy it into your web browser.

http://www.logitech.com/en-us/webcam-communications/webcams/devices/6333

Download the drivers first, once the download completes and you install the drivers you may be prompted to connect your camera if so then do that. If your not asked to plug in your camera wait until the driver install completes then plug in your camera. A window should pop up saying a new device or drivers are being installed, it may not since you already have the drivers on your computer. Then reboot your computer (restart) your computer then go back to the web site above and install the software they have and any updates they have. The link above should take you to where you can download all of this if it takes you to the page before then just click on support then it will take you to the page you can download from. After all the software is installed then try your camera you should be ok an be able to use it again with a clear image.

I hope this helps you out, if it does please give me a YES that I did help you out. Thank you.

to install a WinXP component u need the instalable WinXP CD(not the cd that came with you PC or a rescue disk)
Switch on PC, let the machine boot WinXP, after u get the Desktop, insert the WinXP CD, after the CD rom loads WinXP from CD, in the opening menu select:
"Install optional Windows Components:
in the next menue, select Accessories and Utilities (Tick the Box)
Click Next and u r done....shut down and re-start...
all the best

I would try the realtek audio driver instead. there are two different audio drivers for that board. Here is the link:
http://support.asus.com/download/download.aspx?SLanguage=en-us

select the socket 775 then look for the p5kpl board then look in the audio section and select the realtek driver

Yes, it need WinXp service pack 2 or above, so u need to update your WinXP to service pack 2 or above before u continue.

YBC (/\)

If you are using winxp so problem or else type in drivers for logitech and the model no. on google.com and voila! you get the drivers,

if you have windows vista installed.
try updating the camera device driver through this link:

Lenovo camera driver

for windows xp

Lenovo camera driver winxp

hope this post helps :)

hey .do you want to use it with msn or yahoo messenger?ok follow the instruction.


1.go Tools->audio and video setup->and click next to set your sound card and click next again and third time clic text to set your webcam as default.at 3 step choose your camera from the list and enjoy the webcam chat.in case not solve your problem contact me we can solve the problem via chat

You may need to get the new WIA (Windows Image Acquisition) drivers. When you connect a digital camera to any laptop that runs WinXP, the OSmay not recognize the camera. If you download and install new drivers from the Web site, you receive the following error message when WinXP tries to detect the camera: "Windows image acquisition service error system cannot find file specified ‘imaging'." To fix this problem, you must first remove all current related camera drivers and reinstall the updated drivers.

Movies shot on FUJI's digital cameras are recorded in Motion JPEG format and can be played back using QuickTime version 3.0 or later. (You can download QuickTime from the Apple Computer site). To play back movies in Windows Media Player, download and install DirectX 8.0 or later from the DirectX website. Let us know if it fix your problem,or you need for more help. Good luck !!