- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
In a sense, it does use ink. In the form of a film, like carbon paper. you can get replacement rolls here, or just type in your model number and film in to a search engine. http://www.officeworld.com/supplies-finder/Sharp--UX-P200--thermal-fax?gclid=CMuQvazhhaUCFYdc2goddDh1NQ
Yes you can stop it printing the report. Use the menu to cruise through the settings for fax. You will find the reports section and recognize that you don't want the memory storage report, so disallow it by pressing th no key.
Sounds like you have the machine set up to print reports on all occasions, fax transmission, error, etc. You can change this by doing the following: 1 Press these keys: The display will show: 4 FUNCTION TRANSACTION LIST 2 Press a number from 1 to 5 to select the condition for printing. ALWAYS PRINT A report will be printed after each transmission, reception, or error. ERR/TIMER/MEM A report will be printed after an error, timer operation, or memory operation. SEND ONLY A report will be printed after each transmission. NEVER PRINT A report will never be printed. ERROR ONLY A report will be printed only when an error occurs. To print from memory: If the memory becomes full... If the memory becomes full while the document is being scanned, MEMORY IS FULL will appear in the display. ♦ Press the START/MEMORY key if you want to transmit the pages which have been stored up to that point in memory. The remaining pages will be ejected from the feeder. After transmission, the memory will be cleared and you can transmit the remaining pages. You will also need to transmit the page which was being scanned when the memory filled up. ♦ Press the STOP key if you want to cancel the entire transmission.
Does your machine show anything on the confirmation report like fax number,duration, pages sent, etc. or is the image just not being printed. If you have properly programed machine to show image on the confirmation report. I don't see anything that will cause that except your origianls may not right side up/down.