How do I telnet into my NetGear R6300 Router?

SOURCE: not able to telnet to my home router (netgear WGR614V9)

You have to have telnet access enabled for all earlier revisions of wgr614. See : http://www.seattlewireless.net/index.cgi/NetgearWGR614#UnlockingtheTelnetCosole but bear in mind that v9 is not known officially to have a telnet CLI.

Cheers,

Posted on May 06, 2009

Prashant M

• 2278 Answers

SOURCE: how to telnet netgear router

Are you trying to set up the router with the Telnet ISP.
first make sure that the computer is able to go online when connected directly to the modem.
Click Here for more info about how to set up router

Posted on Oct 25, 2009

SOURCE: Not able to connect to my netgear login. I clicked on a button and now it wont connect. Any Suggestions

You need to configure the Netgear wireless router first.
Connect a LAN cable from the Netgear to the LAN port on your computer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = password You can now change the default admin password and configure the wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Posted on Apr 14, 2013