I need to buy an adapter for the LCD and it doesn't seem to be a standard port. I would like to know what it lools like so I can buy one as the LCD no longer has one
Most devices are Negative to Earth, Chassis and Positive to the Center Pin on the "Adapter". So probably any 12 - 14 Volt say 4Amp well regulated, or Switch Mode power Supply probably would power your unit.. If you don't know the exact voltage Start at about 6 Volts and work up until it works correctly.. I often use a switchable power Supply to find the right voltage and then get a fixed supply to suit.
Posted on Aug 31, 2007
Check this
site for more details. "Electro-help"
is the site name. Search it by google
search. You can locate it, either at
the bottom of the first search page, or at the top of the second. It is an electronics equipments repair help
site in English.
213 views
Usually answered in minutes!
×