Question about Lexar Electronics - Others
Video from vonnic dvr captured on flash drive. recorded with extension .mp4 codec h.264. can not open with windows media player or VLC. Operating system windows 7.
A flash drive should not discriminate over what file you try to put on it, so long as the drive is big enough to store the file in question. Don't try to write to the flash drive directly, always transfer files already stored on your hard drive to it.
Posted on Jan 08, 2008
You need a card reader. Then you plug the card into it and it'l appear as a drive letter and you can access or copy the files.
Posted on Jan 24, 2008
This seems to be the problem of most of us
these days and some of our readers who wanted to know the methods how
they can remove the Write Protected error from their USB drives like Pen Drives and memory cards.
What is Write Protected error and why it happens?
In the Write Protected error, we can’t write or copy any data in our flash drives and even can’t format the drive.
There are many reasons that cause this problem, let’s see solutions of them.
• First of all try to locate a small switch (if any, that you may have not noticed) at some place on the drive or memory card reader. This is the prime reason for this error. If there is one, switch it to the other side to turn the protection off.
• Yes I know this problem is also occurring these days without this switch but not to worry. Just download this helpful software form here
and run it to execute a “low-level format” on the drive. This software is quite handy and may take few attempts to actually remove the error.
• The problem can also be caused by some virus activity so just get it scanned by some updated good anti virus which may solve your problem.
• BUT if none of the methods listed above solves your problem then your pen drive might have gone corrupted, so just get it replaced.
Hope any of the methods listed above solves your problem.
After the low level format, you may need to “Partition the drive“. Dont worry, partitioning a pen drive means allocating it its File System and Cluster Size that was lost after the Low Level Format.
Click OK and the drive will be reusable after this.
Update 2 (Better Solution):
Follow the steps in this post and just put the value 0 (zero) in step 5.
This will surely solve your problem now.
rate me and vote me..
Posted on Jan 08, 2010
You don't paste into a file, but to directories. If you select a file and highlight it, paste disappears from the menu. It only shows up if you select and highlight an entire directory name.
Posted on Jan 18, 2010
Tips for a great answer:
on Nov 19, 2010 | Computers & Internet
Oct 09, 2014 | Computers & Internet
Jan 16, 2013 | Computers & Internet
on Sep 13, 2010 | Computers & Internet
on Aug 06, 2010 | Computers & Internet
Feb 28, 2011 | Nokia 7230 Cell Phone
on Aug 04, 2010 | Cell Phones
on Aug 03, 2010 | Cell Phones
on Jul 29, 2010 | Cell Phones
on Mar 17, 2010 | Computers & Internet
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: