Menu Options there are two menu options, 1)when the camera is set to play and you select video mode, and 2) when the camera is set to play and you selct memory mode. The menu mode works fine for option 1, but I can't get the menu mode to display for option 2. I am trying to turn off the osund for the functions keys, and I beleive this is doable using play/video menu mode.

http://translate.google.com


Secret service menu Hannspree HSG1113

https://electronicshelponline.blogspot.com/2015/03/hannspree-lcd-tv-how-to-enter-service.html

Possible menu - Quoting from link above:


SERVICE MODE [Hanspree AT06 42" LCD TV] (Horizontal Frequency 31.5KHz to 48KHz)
* In the TV mode, adjust volume to Zero and press number keys 9 > 8 > 7 > 6 to enter service mode.
* To exit, press the EXIT button on the remote control.

SERVICE MODE (Hanhspree GT02 32E - GT03-37E1)
1 Switch on the LCD TV .
2 Press 9-9-1 on the remote control to enter the internal Service menu.
3 Press MENU to switch the service mode pages.
4 Press ?? to scroll through the various menu options.
5 Press ?? to change the menu settings.
6 Press MENUto save the new settings and switch to next page and press EXITto exit from service mode to normal mode.
TV / AV / S-VIDEO / WHITE BALANCE / BRIGHTNESS & CONTRAST ADJUSTMENTS
WHITE BALANCE ADJUSTMENT
1 Press 991 on the remote control to enter the internal Service menu.
2 Press MENU to switch to the PW106 Scaler Menu page
3 Press ?? to scroll to Page 2-3 options
4 Press ?? to adjust the Offset Red, Offset Blue, Gain Red, Gain Blue menu settings.
5 Press EXIT to save the new settings and exit. [Don't adjust others setting in page 2-3]



Click on the Pictures to Zoom In
BRIGHTNESS ADJUSTMENT
1 Repeat the above mentioned step 1 to 2
2 Press ?? to scroll to PW106 FE VDC Menu Page 2-1 options
3 Press ?? adjust the Brightness setting.
4 Press ?? to scroll to TV/AV/S Parameter=AV1 setting and pressuto run the setting. (This procedure will copy the settings of AV1 to S & TV)
ATSC DTV WHITE BALANCE / BRIGHTNESS / CONTRAST ADJUSTMENT
1 Repeat the above mentioned step 1 to 2
2 Press ?? to scroll to PW106 Scaler Menu Page 2-3 options
3 Press ?,? to adjust the Offset Red, Offset Blue, Gain Red, Gain Blue menu settings
4 Press to save the new settings and exit. [Don't adjust others settings in page 2-3]
YCbCr & YpbPr of COMPONENT 1, 2 WHITE BALANCE/BRIGHTNESS/CONTRAST ADJUSTMENT
Getting COMPONENT-1 connect to 1080i signal. (The settings could not be saved if signals input from COMPONENT 2 or connect to other sources such as 720P, 480P, 480i,etc.
WHITE BALANCE ADJUSTMENT OF Component
1] Repeat the above mentioned step 1 to 2
2] Press ?? to scroll to PE106 FE ADC page 2-3 options
3] Press ?? to adjust the Offset Red and Off Blue settings.
4] Press ??to adjust the Offset Green setting.
5] Press ?? to adjust the Gain Green setting.
6] Press ?? to scroll to 480i/480P/720P Parameter=1080i setting and press ? to run the setting. (This procedure will copy the setting of 1080i to 480i/480P/720P)
7] Press EXIT to save the new settings and exit.
WHITE BALANCE ADJUSTMENT OF PC INPUT
1.Connecting to VGA Timing mode
2.Under service mode, Press ?? to scroll to PE106 FE ADC page 2-2 options
3.Press ?? to adjust the Offset Red, Offset Green and Off Blue settings.
4.Press ?? to adjust the Gain Red and Gain Blue settings.
5.Press EXIT to save the new settings and exit.

Using Messenger...
1. click on Tools tab and on drop-down menu, click on Audio and video setup...
2. click Next button and on Set up Audio and Video - Webcam, click on v and Select webcam
3. if webcam image display is satisfactory, click Finish button at the bottom right of the window
4. click on Tools tab and on drop-down menu, click on Options
5. in Options window, under Webcam click to set check-box to Allow others to see I have webcam
6. at the bottom of the Options window, click the OK button to exit

Using Skype...
1. click Tools tab and on the drop-down menu, click Options
2. in Skype - Options window, in the left side-bar
2. click on Video settings to Set up your webcam
3. click on 1 of the 3 radio buttons to Automatically receive video and screen sharing from...
4. click on 1 of the 2 radio buttons to Show that I have video to...
5. at the bottom right of the Skype - Options window, click the Save button to exit

The Sony Dash display comes preinstalled with a demo mode that will continue to play untill it is deactivated. It is different than a usual Dash. To disengage the demo mode please perform the following actions: 1) Unplug AC cable from back of Dash but leave plugged in wall 2) Press and hold top menu button and plug cable back into Dash (continuing to hold menu button) 3) You will shortly see a screen for Special Options and will be asked to continue to hold Menu button for 3 seconds. Do so than release 4) Wait about 90 seconds and a "special options" menu will appear 5) Select the last option "Restore Factory Settings" 6) Agree to message saying settings will be lost and wait about another 90 seconds for it to restart 7) Allow the short demo video to play and you will be dropped into new menu regarding the tour 8) Select the last option, "never play tour again" These steps should return the Display Dash into a normal unit and save the customer some aggrivation.

You can change the OSD language (that the camcorder displays the menu screen/options and messages) by:
1. Press the MENU button - the menu screen appears 2. Press the < (left) or > (right) button to select "Settings" - the settings menu appears 3. Press the ^ (up) or v (down) button to select "Language" and then press the OK button 4. Press the ^ (up) or v (down) button to select the desired OSD language (English), and then press the OK button 5. When you're done, exit by pressing the MENU button and all the menu options & messages will be refreshed in the selected (English) language.

Hi,
Please follow the steps below to reset the setting to default...

1. Turn on the camera and press the <MENU> button to open the menu. 2. Using the button, highlight the yellow (Set up) tab. 3. Using the button, select [Reset All..] and press . 4. Select [OK] and press .

• Settings cannot be reset when the camera is connected to a computer or to a printer.
• The following cannot be reset:
• • Shooting mode
  • The [Date/Time], [Language] and [Video System] options in the (Set up) menu
  • White balance data recorded with the custom white balance function
  • Colors specified in the [Color Accent] or [Color Swap] modes of My Colors
  • Newly added My Camera settings

I turned it on, and pressed the video/live recording button that was next to the trash/delete button. That is a whole other menu. After pressing the video/live recording button, I just went up to the first selection, "Program." That takes it off the basic/Q-Mode, which opens additonal options, like ISO and Date Stamp on/off. So basically:
1) Turn on, having the camera on picture taking mode, not review picture mode.
2) Press Video/Live Recording button.
3) Go to first option, called "Program"
4) In this mode, many other options are available, and there will be smaller icons.

You need to go into your Play Mode ssettings and select "Repeat All" to turn off this feature:
Play mode
You can set your player to play music tracks randomly (Shuffle All ) or repeatedly (Repeat One or
Repeat All ).
1. From the main menu, select Settings > Play mode.
2. Use the VERTICAL TOUCH STRIP to scroll up or down the options.
3. Press § to select an option.
4. Press § again to deselect an option.

All cities in arcade mode Enter the options screen and select the "Cheats" option. Enter "roadtrip" or "crosscountry" at the cheat menu to unlock all cities in arcade mode.

Increase car mass in arcade mode Enter the options screen and select the "Cheats" option. Enter "hyperagro" at the cheat menu.

No damage Enter the options screen and select the "Cheats" option. Enter "ontheroad" at the cheat menu.

Faster pedestrians Enter the options screen and select the "Cheats" option. Enter "urbansprawl" at the cheat menu. Note: This code also unlocks all cities in arcade mode.

Argo special move Enter the options screen and select the "Cheats" option. Enter "dfens" at the cheat menu to unlock the Argo special move.

Roar special move Enter the options screen and select the "Cheats" option. Enter "Rjnr" at the cheat menu to unlock the Roar special move.

Zone special move Enter the options screen and select the "Cheats" option. Enter "allin" at the cheat menu to unlock the Zone special move.

Bunny head Enter the options screen and select the "Cheats" option. Enter "getheadl" at the cheat menu.

Flaming head Enter the options screen and select the "Cheats" option. Enter "trythisathome" at the cheat menu.

Pumpkin head Enter the options screen and select the "Cheats" option. Enter "getheadk" at the cheat menu.

Skull head Enter the options screen and select the "Cheats" option. Enter "getheadn" at the cheat menu.

Snowman head Enter the options screen and select the "Cheats" option. Enter "getheadm" at the cheat menu.

Yellow smile head Enter the options screen and select the "Cheats" option. Enter "getheadj" at the cheat menu.

Chrome body Enter the options screen and select the "Cheats" option. Enter "haveyouseenthisboy" at the cheat menu.

Add $1 to career money total Enter the options screen and select the "Cheats" option. Enter "kubmir" at the cheat menu. Note: If you have a controller with an auto-fire feature, you can use it to get more money easily. Go to the cheat menu and enter "kubmir". Then, press R2 and set the word "kubmir" to the top slot. Next, set R2 and X to auto-fire. Tape down the R2 and X and allow the game to remain in that state.

Subtract $1 from career money total Enter the options screen and select the "Cheats" option. Enter "rimbuk" at the cheat menu.

Chevy Cobalt SS Win the Unbeatable Street Racers tournament in Tokyo Challenge mode to unlock the Chevy Cobalt SS.

Dodge Magnum Win the Ginza tournament in Tokyo Challenge mode to unlock the Dodge Magnum.

Gemballa F355 Win the By Invitation Only tournament in Tokyo Challenge mode to unlock the Gemballa F355.

Hotmatch Chingon Win the Choppers Of America tournament in Tokyo Challenge mode to unlock the Hotmatch Chingon.

Hummer H3T Win the Big Playas tournament to unlock the Hummer H3T.

Nissan Skyline 02 Win all thirteen Unbeatable Street Racers races to unlock the Nissan Skyline 02.

Nissan Sport Concept Win the Class C Vehicles Only tournament to unlock the Nissan Sport Concept.

Paul Smart Sports Bike Win the Original Riders tournament to unlock the Paul Smart Sports Bike.

Tokyo Police Car Win all tournaments in Tokyo Challenge mode to unlock the Tokyo Police Car.

Maybe this FAQ will help ya? Problem: Camcorder will not connect to iMovie - No camera attached Possible Solutions: * Are you using a 4 to 6 pin firewire cable? That is the ONLY thing you can use. No USB cables or anything else * Are you using a compatible camera? Still cameras that take movies are NOT a DV camera * How new is the cable? If it is pretty old or you have kinked, it you may need another one * Is the camera in DV mode? It should be. (Usually in the menu options somewhere) * Have read ALL of Apples help topics on this If your good with all the above: 1. Close iMovie 2. Delete all iMovie plist files for iMovie located in Home/Library/Preferences 3. Plug the camera in to the wall (electricity) 4. Make sure you have a good firewire cable and plug it in to the Mac from the camera 5. Turn off your camera 6. Reset your pram 7. When the Mac is booting, power on the camera 8. Start iMovie Sony camcorder special fixs: 1. Turn your camcorder to Play mode. 2. Press menu button (or relevant touch-screen button) 3. Click the 'ETC' item and then to CONTROL. 4. Select i-link (and not IR). or 1. Turn your camcorder to Play mode. 2. Press the Menu button (or relevant touch-screen button) 3. Scroll down the Menu to the 'ETC' option, if there is one 4. Click the 'ETC' item and choose 'VIDEO EDIT' if it's there 5. Click 'VIDEO EDIT' and 'MARK 1 IN' may appear 6. Click on 'MARK 1 IN' and then exit from the Menu options, by pressing the Menu button again Your Sony cam should now work OK with iMovie. * Reason? The camera and Mac can't decide which device is giving the FireWire instructions, and which is supposed to be receiving and acting on them. Using this sequence (above) lets the camera receive instructions from iMovie.

* The MPEG Playback function works in M. PLAY mode only. * You can play moving picture images on the Memory Card. * To hear sound during MPEG4 playback, you must hook up to a PC and listen to the PC's speaker. (You cannot hear it from the speaker on the camcorder or a TV) 1. Set the mode switch to MEMORY CARD position. 2. Set the power switch to PLAYER mode. 3. Press the MENU button and turn the MENU DIAL to highlight MEMORY. 4. Press the ENTER button to enter sub-menu. 5. Use the MENU DIAL to select MPEG4 from the sub-menu. (M. PLAY SELECT) 6. To exit the menu, push the MENU button. 7. Using the (FWD) and (REV) buttons, search for the moving picture that you want to playback. 8. Press the PLAY/STILL button. The moving pictures recorded on the MEMORY CARD begin playing back.