The date and time (and a lot more) are stored with every picture in its EXIF metadata. Any photo viewing/editing program should be able to display this data. To print this data, please consult the documentation for whatever program you're using to print your pictures. Depending on the program and printer you may print the date on the image, in the margins, or on the back.
SOURCE: Power Shot SD550 Date Stamp
Dear BethSmith,
I have had the same problem for a long time. It has nothing to do with the battery, etc.. It has to do with the software of the camera.
You are only able to have time stamps on the photos when you are in the postcard mode. (resolution will be set to 1600x1200, at fine setting) Check out page 29 and 39 of Advance user manual!
Good luck,
Shah
SOURCE: Setting date and time on the picture
OK, I FOUND SOME INFO ON A WEBSITE THAT I'M GOING TO HOTLINK FOR YOU. SEEMS LIKE THE ONLY WAY YOU CAN DATE/TIME STAMP A PHOTO IS TO HAVE THE CAMERA IN THE POSTCARD MODE. YOU CAN READ ABOUT THIS IN THE WEBSITE I'VE LINKED FOR YOU. HOPE THIS SOLVES YOUR QUESTION, AND IF YOU NEED MORE HELP, REPLY TO:ARCLIGHT1217. IF THIS HELPS, PLEASE REMEMBER TO RATE THIS SOLUTION. THANKS!
http://www.imaging-resource.com/PRODS/SD750/SD750A3.HTM
GOOD LUCK!
SOURCE: I cannot get a date
In order to get the date stamp on the pictures, the resolution/size has to be set to "Postcard". Look at the menu and you will see L, M1, M2, M3, S, and Postcard. Then you can turn on the date stamp option.
SOURCE: no picture in view finder before I take picture
If it is Canon A60 camera then it has bad ccd imager and requires replacement.
Canon replace ccd imager Free of Cost as per announced scheme.
Please click Canon CCD Imager Advisory for details.
If camera model is different then check is it listed in above Canon page for free repair.
SOURCE: date stamp will not show on my camera
I found the solution o-line. All I had to do was switch the camera to the 'postcard' mode and instant presto, I was able to access the date stamp mode. I want to express my thanks to the (I don't remember who) person who posted the solution.
52 views
Usually answered in minutes!
×