Tv won't accept an input

1.) Press and hold down the "Menu" key until the manufacturer's logo appears on the screen. This could take up to a minute or more. Release the "Menu" key when the logo appears.
2.) Immediately press the "9," "8," "7" and "6" keys in this order. Press the "Enter" button on the remote to enter the "Service Menu" screen.
3.) Press the "Menu" button to go to the second of the two "Service Menu" screens. Press down on the "Down" arrow until you highlight "Color Calibration." Press the "Enter" button to enter the "Color Calibration" screen.
4.) Select one of the color bars on the screen. Adjust the color by changing the values of the color bar by pressing left and right on the "left" and "right" arrows on the remote. Repeat this procedure with the other color bars as well. Stop adjusting the colors when the green cast is no longer present.
5.) Press and hold the "Power" button on the remote to exit the "Service Menu" and save the adjustments you have made.
Now turn the T.V. off. When you turn it back on it should reflect your personal preference.

Read more: http://www.ehow.com/how_7302235_fix-tv-screen-green.html#ixzz2fM4Pfcki

Read more: http://www.ehow.com/how_7302235_fix-tv-screen-green.html#ixzz2fM3rDVkt

Read more: http://www.ehow.com/how_7302235_fix-tv-screen-green.html#ixzz2fM3hkBLp


Read more: http://www.ehow.com/how_7302235_fix-tv-screen-green.html#ixzz2fM3VlPaY


Read more: http://www.ehow.com/how_7302235_fix-tv-screen-green.html#ixzz2fM3H5rYm

this happened to my tv once, i ended up replacing it
solving it yourself may cause severe burns, electric shocks and even death, so i recommend you to letting a professional check it out

How to Fix a TV When the Screen Is Green


A TV is calibrated by the factory to provide a "standard" picture that attempts to appeal to the vast number of buyers who take the set home. To adjust a TV picture that is too green, you must first enter the hidden "service menu" that technicians use. Adjusting the colors to remove the green cast will save you the cost that would otherwise be incurred from a TV technician coming to your home. No special tools are needed, nor any expertise in how the TV works.

Press the power button on the remote of a TV whose picture is too green in order to turn it on.

Press and hold down the "Menu" key until the manufacturer's logo appears on the screen. This could take up to a minute or more. Release the "Menu" key when the logo appears.

Immediately press the "9," "8," "7" and "6" keys in this order. Press the "Enter" button on the remote to enter the "Service Menu" screen.

Press the "Menu" button to go to the second of the two "Service Menu" screens. Press down on the "Down" arrow until you highlight "Color Calibration." Press the "Enter" button to enter the "Color Calibration" screen.

Select one of the color bars on the screen. Adjust the color by changing the values of the color bar by pressing left and right on the "left" and "right" arrows on the remote. Repeat this procedure with the other color bars as well. Stop adjusting the colors when the green cast is no longer present.

Press and hold the "Power" button on the remote to exit the "Service Menu" and save the adjustments you have made. Turn the TV off.

Hello it means that the scanner bulb temperature is too low or there is some internal or external electrical malfunction.Try these solutions.
1.Check the scanner light.Make a color copy of any document by pressing the Start, Copy, Color button on the product control panel.While the product is making the copy, lift the scanner lid slightly to see if the scanner light is visible.
2.Make sure that the room temperature is suitable for your device
3.Perform a Power Cycle on the unit by following the steps below:
1.Turn the unit off.
2.Unplug the power cord from the unit.
3.Wait 30 seconds, and then re-connect the power cord to the unit.
4.Turn the unit on.
5.Make a color copy by pressing the Start Copy Color button on the control panel.
4.Check the power connections.Disconnect the power cord from any power strips or surge suppressors and then plug it directly into a wall outlet.Try making a color copy by pressing the Start Copy Color button on the product control panel.If the error message displays again, temporarily move the product to a different room, or plug the power cord into a different wall outlet.
5.Perform a partial reset
1.Disconnect the power cord from the product.
2.Press and hold # and 3 while reconnecting the power cord to the product, and then release both buttons.
3.Try making a color copy by pressing the Start Copy Color button on the product control panel.
6.Perform a semi-full reset(Performing a semi-full reset deletes any saved phone numbers on the product).
1.Disconnect the power cord from the product.
2.Press and hold # and 6 while reconnecting the power cord to the product, and then release both buttons.
3.Try making a color copy by pressing the Start Copy Color button on the product control panel.
If nothing of these works and you still see the error you should take your printer to support service for repairing the parts.

1. unit seems to be in the "test" mode
2. some how it has defaulted to this mode.
3. Disconnect all device to the TV and then power unit on.
4. If tv turns on without color bars then a device connected is the culprit.
5. Try each device separately and see which has a colorbar displayed.
6. if the latter doesn't isolate then it is the unit itself and need a tech to look at the main board for video malfunction -- test

Introduction Perform a semi-full reset to set all user menu settings, telephony parameter settings, country/region and language UI, fax memory settings, fax journal information, speed dial and broadcast lists, personal header information, and junk fax settings to the default settings. Performing a semi-full reset of the All-in-One

1. Use the On button to turn on the product.
2. Remove the power cord from the product.
3. Press and hold the # and 6 buttons.
4. While holding the buttons down, connect the power cord to the product.
5. Continue to hold the buttons down until the color graphics display becomes blank, then release the buttons.
6. Use the On button to turn on the product. The reset information appears on the color graphics display.

Perform a Soft reset:

Introduction Perform a semi-full reset to set all user menu settings, telephony parameter settings, country/region and language UI, fax memory settings, fax journal information, speed dial and broadcast lists, personal header information, and junk fax settings to the default settings. Performing a semi-full reset of the All-in-One

1. Use the On button to turn on the product.
2. Remove the power cord from the product.
3. Press and hold the # and 6 buttons.
4. While holding the buttons down, connect the power cord to the product.
5. Continue to hold the buttons down until the color graphics display becomes blank, then release the buttons.
6. Use the On button to turn on the product. The reset information appears on the color graphics display.

Introduction Perform a semi-full reset to set all user menu settings, telephony parameter settings, country/region and language UI, fax memory settings, fax journal information, speed dial and broadcast lists, personal header information, and junk fax settings to the default settings. Performing a semi-full reset of the All-in-One

1. Use the On button to turn on the product.
2. Remove the power cord from the product.
3. Press and hold the # and 6 buttons.
4. While holding the buttons down, connect the power cord to the product.
5. Continue to hold the buttons down until the color graphics display becomes blank, then release the buttons.
6. Use the On button to turn on the product. The reset information appears on the color graphics display.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01457329&cc=us&lc=en&dlc=en&product=1153494

Or a Full reset:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00720248&cc=us&lc=en&dlc=en&product=1153494

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

The repair of this unit will be determined by the status of the high voltage on initial power up. You need to do a few tests in order to narrow down what the high voltage is doing. You will need someone to assist you.

Unplug the AC cord. Remove the rear lower cover from the tv. Make sure the room is quiet. Put your ear inside the tv being careful not to touch anything metal, although most metal objects are ground. Next, have someone insert the cord into the AC outlet while listening very carefully. What you are supposed to hear is a click which is a relay and high voltage snap up. If you do not hear a swishing sound, which is the sound of high voltage have someone press the power button on the front while you are still listening. If you hear the swishing high voltage sound come on, it will come on and stay on, or collapse. Repeat the test, unplug the cord and plug in the cord to confirm the high voltage is coming on and staying on or coming on and going into collapse.

If the high voltage does not come up at all it means that there is a basic high voltage power supply problem and an experienced technician needs to guide you through a high level repair which is above the scope of this discussion. You may want to contact a skilled technician.

If the high voltage comes up and collapses right away, which is the most common fault, it means that the unit is entering the protection mode. The protection mode is most commonly caused by convergence or vertical sweep system on that model and big screens in general. These repairs can possibly be done by consumers with basic electronics knowledge. If you want to repond with test results we can supply more information on repairing the convergence or the vertical sweep system.

If the high voltage stays up then the likely fault is a power supply problem is muting both the video and the audio causing the unit to go into protect. Consult a service manual, track power flow though out the unit to determine which circuit is impaired.

Unplug the power cable from the All-In-One when there is still power in the unit.
Also unplug the power cord from the wall outlet.
Leave the cable unplugged for atleast 1Min time.
And connect the cable directly to wall outlet with out any surg protector (if you have a different outlet try with that)
Then before connecting the cable to the All-In-One press and hold the # and no 9 button do not release the buttons untill it comes up with a mesage as reset (or if the screen goes blank then release the keys and turn the power on)
Then press the setup/menu button and then press the right arrow key till you see print reports> the press Ok and scroll to print test page and check if it is functioning properly.
Then try a color or Black copy and check.

Good Luck

Dear customer,
The most common solution is to follow the steps as follows
1. unplug the power cord
2. press and hold down the <ON/OFF> button and reconnect the power cord
3. press the <STOP/RESET> button 2 times and then release the <ON/OFF> button
4. Display LED show "0" press the <+> button 1 time Display LED show "1"
5. press the <Start Color > button 2 times and then press the <ON/OFF> button waitng for testing out 2 pages
6. Open the cover. The carriage that holds the ink will move to the left hand side. and then unplug the power to the printer
7. Push down on the end of the black cartridge. A clicking noise will be heard.
8. Slide the cartridge out of the holder towards you.
9. Push down on the end of the color cartridge. A clicking noise will be heard.
10. Slide the cartridge out of the holder towards you.
11. Once both cartridges are removed, unplug the power to the printer (without turning it off).
12. Reconnect the power cord.
13. Turn on the printer.
14. Open the cover. The carriage that holds the ink will move to the left hand side.
15. Place the black cartridge in the bottom of the printer.
16. Slide the black cartridge back until is cannot go back any further.
17. Push up on the end of the black cartridge, a clicking noise should
be heard.
18. Place the color cartridge in the bottom of the printer.
19 Slide the color cartridge back until is cannot go back any further.
20. Push up on the end of the color cartridge, a clicking noise should
be heard.

hope its udeful. thank you.

Hi,

As you mentioned you have already done a reset on the printer , may i know how u have done it ? In case u did a power reset like > turning off the printer and turning it on , you can also try the following steps as well .

1
Take out the cartridges from the unit .
2
Make sure the unit is connected to the wall jack directly without any surge protector.
3
Unplug the power cord from the back of the unit ( without turning off the unit ) .
4
Now press the # and 6 key together , while holding these keys down plug in the power cord back into the unit .
5
Do not release the keys after a few seconds u will find te hp logo or bars moving across the screen .wait while the unit turns off.
6
after one minute turn on the prnter . it will go into alligment phase > let it finish .
7
after its done > try to make a copy

thanks