Trying to clear error code 36-2
RESETTING CODE E000003-0000 ON CANON IMAGE RUNNER 5000 COPIER
Posted on May 22, 2008
Try unplugging copier at the wall when its turned on, wait 20 seconds then plug in again with it still turned on
Posted on Sep 21, 2007
I have e studio 352 photo copier.
there are two issues.
1. i have not its driver cd, so i can not use it as printer, fax and scanner.
2. it often blinks code error than does not work. i have to bring a technician to solve the problem, that takes money and time also.
please help me o solve the issues.
Posted on Apr 22, 2010
I appreciate your inquiry, friend!
Based off what you have described your Frigidaire freezer is displaying an error code of 36 hours. Normally it will display that once power has been restored, it is indicating that the freezer has been without power for 36 hours. Hold the "alarm reset" for 3 seconds and that should help clear out the code. I hope this is helpful. -Matt
Hello edward, thanks for your post!
I see your Frigidaire washer is displaying an error code "33". However, it appears "33" is an invalid error code. Let's attempt resetting your range. You can do this by unplugging it or flipping the household circuit breaker to the off position for roughly ten minutes. This usually clears false error codes.
If resetting the power does not correct the issue, could you please inform me of the new error code or if your washer continues to display "33". I look forward to assisting you. -Matt
Good afternoon friend, thank you for your post!
I see you are having trouble with your Frigidaire range and you are receiving error code "Sd". However, it appears "Sd" is an invalid error code. It is possible that the error code is missing characters?
In the meantime, let's attempt resetting your range. You can do this by unplugging it or flipping the household circuit breaker to the off position for roughly ten minutes. This usually clears false error codes. If resetting the power does not correct the issue, could you please inform me of the new error code or if your dishwasher continues to display "Sd". I look forward to assisting you. -Matt
1,096 views
Usually answered in minutes!
Problem with machine cod: in the monitor always pulse "L" and "6"
×