Question about Lands Phones
Caller id phone no display blank screen
Inside the phone there will be a strip which is connected with the display clean the strip.
Posted on Jul 23, 2013
SOURCE: Caller ID does not work
I FIXED IT!!! YIPEEE!!
What I did was UNPLUG the base's power unit from the wall... waiting about one minute, and plugged it back in. That caused it to "reboot" the entire system, and the CID now shows itself.
Posted on Mar 07, 2008
Had a similar issue with a brand new DECT2035 uniden phone, displaying incoming call not caller ID.
Checked my old uniden phone, and it was receiving CID. So I connected my DECT2035 to that line and then lo and behold I got my CID.
After further investigation I found that CID on my dect phone wont work if its using a shared filter (ie. adsl/phone splitter). Had to find an unfiltered splitter and then just put a phone filter (that I got with my adsl modem) onto the line that is directly connecting the phone. and then WOOHOO I have caller ID.
Hope this helps you... I got my wife a little cranky over this one cos it took me over an hour and a half to try and sus this one out =)
Posted on Apr 30, 2009
Thanks for using FixYa. I think you have stored more than 100 Caller ID messages and hence the caller ID is not showing on Uniden Tru8888. In the following cases the caller ID will not be shown-
If you answer a call before the Caller ID message is received (for example, before the second ring), the Caller ID message will not appear.
When the call is received via a telephone company that does not offer Caller ID service, the caller’s phone number and name does not appear. (This includes some international calls.)
When the call is via a private branch exchange (PBX), the caller's phone number and name may not appear.
You may receive any one of the following messages:
When a private name is received; Private Name
When a private number is received; Private Number
When a unknown name is received; Unknown Name
When a unknown number is received; Unknown Number
When invalid data is received; Incomplete Data
The Caller ID list stores information for incoming calls - even unanswered calls. You can store up to 100 Caller ID messages and phonebook entries (including Speed Dials) for each handset and the base. You can view the Caller ID list through the handset or base during a call or when the phone is in standby mode.
Memory locations for Caller ID messages and Phonebook entries (including Speed Dials) are common, you can store up to all 100 entries for each handset and the base. Caller ID messages are not stored when you have 100 phonebook entries. When you have stored a total of 100 phonebook entries and Caller ID messages, the oldest Caller ID message is overwritten.
Please do rate the solution and revert for further assistance.
Posted on Aug 16, 2009
Tips for a great answer:
Sep 17, 2014 | Toshiba DKT3020SD Corded Phone
Apr 06, 2011 | Cell Phones
Feb 22, 2011 | Southwestern Bell FT-484 Corded Phone
May 01, 2010 | Vtech ia5864 Cordless Phone
Sep 06, 2009 | Panasonic KX-TG5632 Phone
May 29, 2009 | Nokia 2605 Mirage Cell Phone
112 people viewed this question
Usually answered in minutes!