Question about iLO 3200 32 in. LCD Television

1 Answer

Ilo 32-hd set will power on and off but no other function with customer controls or remote hand unit

Posted by on

  • 6 more comments 
  • JGray23 Nov 25, 2007

    I ve bought 4 programmable remotes an none work. This TV was a waste of money. Buyer beware!

  • tedo Nov 27, 2007

    my set will turn on to standby but cant turn onto video

  • lucinda56 Dec 30, 2007

    remote only turns tv on and off no other controls and tv buttons only on and off work

  • gregmacs32 Jan 23, 2008

    ilo are $hit tvs!!!

  • Anonymous Jan 29, 2008

    800 dollars down the drain my ilo is stuck on HDMI input and will not change nor will any volume or menu options respond to the remote or manual TV buttons. I Had to spend a load of cash getting a new tv that doesn't suck,
    God Bless 52" Sharp Aqous native 1080p. NEVER BUY AN ILO TV!!!

  • Anonymous Jan 29, 2008

    THE POWER BOTTON TURN ON AND OFF BY IT"S SELF NO PICTURE ON THE SCREEN BUT WHEN I HOLD THE VOLUME BOTTON THE TV. SHOW LET IT GON THE TV.DONT SHOW

  • tallyho133
    tallyho133 Jan 29, 2008

    Have same TV and problem as Latec's. They changed the warranty on the 32" TV from in home to shipping it to Calf. and it's not worth $120.00 to send it back. Funny they must know they have a problem and want to screw everyone who bought their piece of shit TV. Lesson learned; never buy one again!!!!!!!!!!!!!

  • jap12345 Feb 02, 2009

    only power button works for on &off other then that on funtion manually or with remote like freez all funtion.

×

Ad

1 Answer

ILO TELEVISION TURN ON AND OFF BY IT"S SELF, IF I HOLD DOWN THE VOLUME BOTTON IT COMES ON,LET THE VOLUME BOTTON GO NO PICTURE

Posted on Jan 29, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was just given a Haier air conditioner model HWR05XC7. It is not manual controlled. How do you operate it?


Unfortunately, the model number you listed is not a current Haier model. However, the electronic controlled unit, use a hand held remote control to operate and set the functions of the AC unit.
Call Haier America Customer Support 877-337-3639. As the may be able to help you and provide you with an Owners Manual.

Hope this helps you. Please let me know. Thanks.

May 09, 2011 | Haier Heating & Cooling

2 Answers

I need a code for my panasonic tv my remote is rm-88e


Hi julius,
If you don't have a code follow this auto search mode, this will automatically search the remote control the code of your unit.
1. Power on the unit(TV).
2. Press and hold SET key and TV key at the same time. The led light will be on at the moment, then released the pressed key.
3. Press the SET key again, then release it. The led light will flash and it is in the quick search mode.
4. Point the remote control to the TV, then press the POWER key(every second) until the TV react. Once the TV reacted try the other function key.
Repeat the steps until you've got the right code.
Hope I helped you.
Have a nice day!
Thanks for using Fixya.

Mar 25, 2011 | Universal Remote Control Remote Control

1 Answer

No sound control: Toshiba T.V. set. ; Hand remote


Hi, Cheri Torres with DISH Network Customer Service. I came across your post and wanted to see if I could help. The information you provided leads me to believe that you will need to address your DISH Network remote to your Toshiba TV. There are a few different codes for each of our different models of remotes. I will list here for you the codes for our more popular models of remotes and also the instructions for addressing your remote to your TV. I hope you find this information useful and if you have any further questions or concerns feel free to email me anytime at [email protected] and I will be happy to help!

Instructions for addressing the remote to the TV
  1. Turn the Television On
  2. Press and Hold the TV Mode button until all other mode buttons light up red.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button.
    Note: The LED will flash three times.
  5. Test functionality with the TV
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Feb 23, 2011 | DISH Network IR Remote Control

1 Answer

Remote control unit flashes 76. No buttons on the remote will function. Water heater will not come on when there is a demand for hot water. Any suggestions?


Remove power source from the unit. If remote control is installed; remove cover and lift the control wires on the terminal...can be accomplished from either end.

Restore power and see if unit functions normally.

Contact Paloma/Rheem customer (800-432-8373) support and notify them IF you are getting a code "76" error. Rheem has recently extended the warranty on the "Burner Control Assm."; which is your problem. The C4-C8 portion of the error code, is where the unit stops the ignition process...burner fails to light, or gives you intermittent hot water. In either case, contact customer support .

If this helps, please indicate so.
Mike//jzklipper

Nov 25, 2009 | Rheem Rtg53xn Natural Gas Tankless Water...

1 Answer

Code c876


Remove power source from the unit. If remote control2.gif is installed; remove cover and lift the control wires on the terminal...can be accomplished from either end.

Restore power and see if unit functions normally.

Contact Paloma/Rheem customer (800-432-8373) support and notify them IF you are getting a code "76" error. Rheem has recently extended the warranty on the "Burner Control Assm."; which is your problem. The C4-C8 portion of the error code, is where the unit stops the ignition process...burner fails to light, or gives you intermittent hot water. In either case, contact customer support2.gif.

If this helps, please indicate so.
Mike//jzklipper

Nov 01, 2009 | Rheem RTG-74PVN-2 Natural Gas Pronto Whole...

1 Answer

My Rheem Pronto model#RTG-74PNV-1 has powered off for some reason unknown, I turned the unit back on and it supplied hot water for approx. 10 minutes before it started flashing a code [C7]on the remote...


Remove power source from the unit. If remote control2.gif is installed; remove cover and lift the control wires on the terminal...can be accomplished from either end.

Restore power and see if unit functions normally.

Contact Paloma/Rheem customer (800-432-8373) support and notify them IF you are getting a code "76" error. Rheem has recently extended the warranty on the "Burner Control Assm."; which is your problem. The C4-C8 portion of the error code, is where the unit stops the ignition process...burner fails to light, or gives you intermittent hot water. In either case, contact customer support2.gif.

If this helps, please indicate so.
Mike//[email protected]

Oct 01, 2009 | Rheem RTG-74PVN-2 Natural Gas Pronto Whole...

1 Answer

Code C8 76


Remove power source from the unit. If remote control is installed; remove cover and lift the control wires on the terminal...can be accomplished from either end.

Restore power and see if unit functions normally.

Contact Paloma/Rheem customer (800-432-8373) support and notify them IF you are getting a code "76" error. Rheem has recently extended the warranty on the "Burner Control Assm."; which is your problem. The C4-C8 portion of the error code, is where the unit stops the ignition process...burner fails to light, or gives you intermittent hot water. In either case, contact customer support .

If this helps, please indicate so.
Mike//jzklipper

Aug 06, 2009 | Rheem Paloma PTG-74PVN / RTG-74PVN...

1 Answer

I just bought a Sony Home Theater DAV seris but there was no remote. Are there buttons on the reciever that work like remote buttons?


most all theater systems come with a remote and it,s odd that your,s did not, usually their are certain functions that you can control from the head unit ,but nowadays you can program a universal remote to your brand that will be able to control the functions of your theater system ,but to make things easier, call the customer service dept of sony and tell them your model# and purchase it direct from the manufactuer, this remote will have set-up functions for your dvd menu,s and will be easier then having to get up off the couch to change settings , thank you ,hope this helped glenn

Mar 03, 2009 | Sony BRAVIA® DAV-HDX277WC Theater System...

1 Answer

Vchip was accidentaly set by guest and password was forgotten


For Panasonic:
Parental Lock Feature

Combo's, Screen will say VCR Lock Activated.

During stop or power off, hold the stop/eject button on the unit for at least seven seconds.

Combo's, Another method
With unit on and no cassette inside, hold the rec/time button on the front of unit for 7 seconds.

CTV's Lock Mode
Only the on/off button will work,the others have no effect. Press the action and power buttons at the same time on the front of the set for 10 seconds or so.

LCD TV's, Lock Mode
If customer forgot Parental Lock Code, unit must be re-initialized.
Press and hold the Volume down button on the front panel, press the OK button on the remote for 5 seconds.

DVD's Lock Mode
Setting Method
The sales demonstration lock function is set by simultaneously pressing the "POWER" button of DVD Player on the remote control unit and the "STOP" button on the main unit. ("LOCKED" is displayed when the lock function is engaged.)
Release Method
The function can be released using the same procedure as for setting. If the remote control unit is not at hand, the function can be released by using the same method as for player initialization (pressing the "PAUSE," "SKIP/SEARCH<<"and "OPEN/CLOSE" buttons simultaneously).

VHS-DVD Recorder (DMR-ES40V), Forgotten Ratings Password
From the Owners manual: Open tray, Keep Pressing Rec and Play/X 1.3 buttons on the remote for 5 or more seconds.
Another servicer found resetting to defaults worked well.
(VCR>DVD Dub) + (Open/Close) + (DVD Rec)
Bill

Apr 01, 2008 | Panasonic CT-27E13 27" TV

1 Answer

Technical Question


#1 Customer has using remonte control which is not same and made for the Model we replaced laser #2 we open the same unit the one we have replaced laser, put 2-3 small drops of lubricant oil on tracking mechanism (shaft) so when you forward DVD movie in frames tracking DC motor was driving that lasser more smoothly, and made the big difference. It's very critical how much resistance DC motor have while reading disc. Customer was happy -We had rersolve this without any JVC tech support.Those liitle tips nobody has -You should make a notes yourself Zack-Tech

Jan 19, 2007 | JVC XV-N5SL DVD Player

Not finding what you are looking for?
iLO 3200 32 in. LCD Television Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top iLO Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

CoppellTVRepair.com

Level 3 Expert

778 Answers

Are you an iLO Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...