showed Er6 changed battery still shows Er6. Is this repairable and where to go. Thanksshowed Er6 changed battery still shows Er6. Is this repairable and where to go. Thanks
5/26/09 I spoke with Bushnell technical support today and they informed me that this error "Er6" means the unit can not repaired. They said this is one of their oldest models and that they don't even have parts for it anymore. They did offer to have me send the old unit into their Returns department in Kansas, and in return for sending them the old/broken unit, they will send me an offer to buy one of their new units at a highly discounted rate. Not a bad trade I guess.
vickers sport optics LOST my quest rangefinders when i sent in for repair After a load of hassle they agreed to send me an ex demo as compensation & GUESS WHAT 3yrs later same problem ER6 !!!! Dont buy bushnell THEY ARE RUBBISHvickers sport optics LOST my quest rangefinders when i sent in for repair After a load of hassle they agreed to send me an ex demo as compensation & GUESS WHAT 3yrs later same problem ER6 !!!! Dont buy bushnell THEY ARE RUBBISH
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is no code list available, so check these things:
1) Low battery, replace if necessary 2) You are trying to measure an object that is too close, try a more diatant object 3) You are not holding the rangefinder steady and have not gotten a reading off the target. Try an easier, larger, more reflective target as a check. 4) You have an electrical problem requiring repair.
If you are still getting an error, contact Bushnell at 1-800-221-9035 for instructions.
This happend to me not long ago and I called Busnell North America and they asked me what type of range finder I had and sent me a new one...NO CHARGE!!
Very nice of them and it was shipped out fairly fast as well. Give it a try...(800) 423-3537
The rangefinder is out of alignment. Vibration, dropping these units make small mirrors inside move slightly. Over time the receiver cannot see what the transmitter puts out. Bushnell can fix, 4-5 weeks w/o unit.
Take the nice cover and neck strap off rangefinder to use on another item. Next use the rangefinder for hammer. boat anchor, etc. Seriously though the problem occurs often in the Bushnell rangefinders and it cost more to fix than to replace with a better brand. A $179.00 original cost rangefinder cost $10.00 to ship back to Bushnell and another $235.00 for repair of a non specified problem for a grand total of $245.00. I consider this a rip off from Bushnell.
I have the same problem, and sent my unit to Bushnell for repair. They were unable to repair it, stated "obsolete" and "repair parts unavailable" and sent it back to me.
Would you be interested in selling me your dead unit for parts for a few bucks? Thanks.
[email protected]
showed Er6 changed battery still shows Er6. Is this repairable and where to go. Thanks
I have the exact same problem with my Bushnell rangefinder. Please help!!
×