Question about Adaptec Computers & Internet

Open Question

Kenmore elite stove flashing f11 - Adaptec Computers & Internet

Posted by Robert Watson on

Ad

5 Related Answers

Anonymous

  • 213 Answers

SOURCE: kenmore elite gas stove

f-1 means the ERC is bad. sometimes turning the breaker off for a couple of min will help but if not the the clock/oven control needs to be replaced

Posted on Nov 22, 2007

Ad

Anonymous

  • 261 Answers

SOURCE: Kenmore Elite H3 error code F11

F11 is a serial communication error. It is recomended to check connections from the motor control unit to the ccu. We are looking for the blue wires that carry info from component to component. The ccu is on top under the cover positioned in back for older machines and front right for new machines. The mcu, motor control unit is behind the kick panel below the door and is front left usually.Again we want to unplug check for dark or crusty connections if not to carefully reseat the connection and not only the blue serial wires but power as well. Remember to first unplug the machine and while you work the machine can reset, 30 minutes is typical.

Posted on Sep 13, 2008

Ad

Anonymous

  • 2 Answers

SOURCE: kenmore elite he 4t washer

I have the he4t and everytime I wash I get an f02 error. The washer wont drain and spin unless you cancel and restart the washer. What can I do to fix this?

Posted on Oct 17, 2008

Anonymous

  • 3741 Answers

SOURCE: Washer stops with F11 code; door won't open

F-11 ERROR CODE MEANS :

Serial Communication Error Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.

TO RESOLVE THE PROBLEM:


  • Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)

  • Check the Drive system for any worn or failed components

  • Check MCU

  • Check CCU

  • Check Motor

  • Check Wire Harness


Posted on May 05, 2009

Anonymous

  • 1 Answer

SOURCE: my kenmore elite electric slide in range displayed error and F13 and the oven won't turn on

i phoned Sears about error code f13 on a gas range, and was told to unplug the range for 30 minutes. i think she meant 30 seconds - to reprogram the microchip. i unplugged it for 15 minutes or so, then reconnected, and it worked.

Posted on May 28, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore elite electric stove. model 79099013102. Intermittent starts beeping then flashing "F7".


The "F7" fault code could mean a stuck or shorted key pad/console or it could mean a failed oven control board. There is no way to reset the control.



A service technician would determine if the problem is with Key Panel/Console or the Oven Control by: See image below.

NOTE

: This is intended for the service technician. I do not recommend attempting to diagnose which one has failed. This test must be performed while connected to the power supply.

I recommend calling a service technician to diagnose and repair your range

May 23, 2018 | Kenmore Kitchen Ranges

1 Answer

WHAT MEANS ERROR CODE FOR MY DRYER MACHINE F11?


if its a Kenmore model then this message says that the button control board has lost sight of the main control board , but its been my experience that this maybe able to be reset and it may never come back or it will not reset and the control board will need replaced (50/50)


cycling power may reset this

Jan 30, 2016 | Dryers

1 Answer

My kenmore stove is showing f11 after i did a cleaning cycle and i can not unlock the stove top but the door to the oven unlocked. after unplugging it now shows the clock needing to be set and the pf on it...


F11= problem communicating with display
Suggest you unplug unit, peel off front of display and clean this and contacts thoroughly.

Replace - all should be good.

Feb 08, 2018 | Kenmore Kitchen Ranges

1 Answer

What does the f11 code on a kenmore elite he3 washer mean


A bad CCU (main control circuit board) will cause this F11 problem 90% of the time

Aug 26, 2010 | Kenmore Elite 45986 Front Load Washer

2 Answers

F11 CODE FLASHES DURING THE SPIN CYCLE


this is a central command error and its something to do with either motor or control
module

Jun 11, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

F11 flashing kenmore he washer


The F11 error code indicates a serial communication failure. This happens when the 2 main control boards are unable to communicate with each other. This is either caused by a loose wiring harness connection or one of the control boards is defective. Good luck and please rate FixYa!

Dec 28, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite HE 5t


Hello

Please see this weblink here for a ton of info on your problem.

F11 = Serial Communication Error. Communication between the Central Control Unit (CCU) and the Motor Control Unit (MCU) cannot be sent correctly.

Do this = Check Wire Harness connectors to the MCU, the motor, and Central Control Unit (CCU)
Check the Drive system for any worn or failed components.

Please rate this post, if you are happy with my response. Respond back to this post if you need more help!

Jan 09, 2008 | Kenmore Elite 45986 Front Load Washer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Adaptec Computers & Internet Experts

John Dio

Level 1 Expert

10 Answers

Robert Graf

Level 2 Expert

268 Answers

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Are you an Adaptec Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...