Why did my enter key suddenly no longer function as to enter, when pressed it brings up a toolbar instead of taking to the next line?

You will need to change the programming for the ext that you want to have the lines appearing on.
Enter programming - Feature **266344
PW - 266344
Press the show key - (top right arroe that is lit on the display)
Enter the ext # you want to change
this will bring you to line appearance press top r arrow
line assignment press top right arrow
show line - enter 001,002 or whatever line(s) you want to ring.
press the change softkey for each line to appear and ring instead of unassigned. Press the next (bottom r arrow) to go through each line after entering 001....
then release.
*** Make sure the sets you change are not forwarded to voicemail after a certain amount of rings otherwise all calls ringing on the newly programmed set will go to that persons voicemail.

Press diamond then ENTER to convert a symbolic result to numeric. To have all results come out in symbolic form, press MODE to bring up the mode screen. Press F2 to get to the second page. Use the arrow keys to move down to the "Exact/Approx" line, press right-arrow, and select "APPROXIMATE". Press ENTER to save the change.

The following should help you draw several graphs.
When you enter a function you should press [ENTER] to validate. At the same time, the cursor moves to the next line. Verify that the = sign on the equation already entered is still highlighted.
If for some reason the = sign of an equation is no longer highlighted, use arrow keys to move cursor on the = sign and press [ENTER].

If only one = sign remains highlighted and all others are not, then in all probability the application Transfrm has been executed before and is still lingering in RAM. When in RAM, it takes over the graphing capabilities of the native OS. This prevents you from drawing more than one graph.You must unload it from memory.

1. Press the [APPS] key.
2. Scroll down to the line that shows Transfrm.
   
3. Highlight it and press [ENTER].
4. In following screen you are invited to Uninstall or continue.
5. Press the number to the left of Uninstall. Validate if need be.
6. Return to the Y= editor to type in functions to graph.

Hi pbqsf
The Menu bar and the navigation toolbar have been disabled. You can enable it by following the steps below:
1) Open firefox
2) Press the 'Alt' key on keyboard (Pressing this button temporarily brings back the Menu bar)
3) When the Menu bar shows up, right click on an empty area right next to Help as shown in the picture


4) Now select the Menu bar option and the Navigation toolbar.

Now, your Menu bar and Navigation toolbar will be up.

Thank you for using Fixya.

The following should help you draw several graphs.
When you enter a function you should press [ENTER] to validate. At the same time, the cursor moves to the next line. Verify that the = sign on the equation already entered is still highlighted.
If for some reason the = sign of an equation is no longer highlighted, use arrow keys to move cursor on the = sign and press [ENTER].

If only one = sign remains highlighted and all others are not, then in all probability the application Transfrm has been executed before and is still lingering in RAM. When in RAM, it takes over the graphing capabilities of the native OS. This prevents you from drawing more than one graph.You must unload it from memory.

1. Press the [APPS] key.
2. Scroll down to the line that shows Transfrm.
   
3. Highlight it and press [ENTER].
4. In following screen you are invited to Uninstall or continue.
5. Press the number to the left of Uninstall. Validate if need be.
6. Return to the Y= editor to type in functions to graph.

The following should help draw several graphs.
When you enter a function you should press [ENTER] to validate. At the same time, the cursor moves to the next line. Verify that the = sign on the equation already entered is still highlighted.
If for some reason the = sign of an equation is no longer highlighted, use arrow keys to move cursor on the = sign and press [ENTER].

If only one = sign remains highlighted and all others are not, then in all probability the application Transfrm has been executed before and is still lingering in RAM. When in RAM, it takes over the graphing capabilities of the native OS. This prevents you from drawing more than one graph.You must unload it from memory.

1. Press the [APPS] key.
2. Scroll down to the line that shows Transfrm.
   
3. Highlight it and press [ENTER].
4. In following screen you are invited to Uninstall or continue.
5. Press the number to the left of Uninstall. Validate if need be.
6. Return to the Y= editor to type in functions to graph.

Here it is.
When you enter a function you should press [ENTER] to validate. At the same time, the cursor moves to the next line. Verify that the = sign on the equation already entered is still highlighted.
If for some reason the = sign of an equation is no longer highlighted, use arrow keys to move cursor on the = sign and press [ENTER].

If only one = sign remains highlighted and all others are not, then in all probability the application Transfrm has been executed before and is still lingering in RAM. When in RAM, it takes over the graphing capabilities of the native OS. This prevents you from drawing more than one graph.You must unload it from memory.

1. Press the [APPS] key.
2. Scroll down to the line that shows Transfrm.
   
3. Highlight it and press [ENTER].
4. In following screen you are invited to Uninstall or continue.
5. Press the number to the left of Uninstall. Validate if need be.
6. Return to the Y= editor to type in functions to graph.

The following should help draw several graphs.
When you enter a function you should press [ENTER] to validate. At the same time, the cursor moves to the next line. Verify that the = sign on the equation already entered is still highlighted.
If for some reason the = sign of an equation is no longer highlighted, use arrow keys to move cursor on the = sign and press [ENTER].

If only one = sign remains highlighted and all others are not, then in all probability the application Transfrm has been executed before and is still lingering in RAM. When in RAM, it takes over the graphing capabilities of the native OS. This prevents you from drawing more than one graph.You must unload it from memory.

1. Press the [APPS] key.
2. Scroll down to the line that shows Transfrm.
   
3. Highlight it and press [ENTER].
4. In following screen you are invited to Uninstall or continue.
5. Press the number to the left of Uninstall. Validate if need be.
6. Return to the Y= editor to type in functions to graph.

When you enter a function you should press [ENTER] to validate. At the same time, the cursor moves to the next line. Verify that the = sign on the equation already entered is still highlighted.
If for some reason the = sign of an equation is no longer highlighted, use arrow keys to move cursor on the = sign and press [ENTER].

If only one = sign remains highlighted and all others are not, then in all probability the application Transfrm has been executed before and is still lingering in RAM. When in RAM, it takes over the graphing capabilities of the native OS. This prevents you from drawing more than one graph.You must unload it from memory.

1. Press the [APPS] key.
2. Scroll down to the line that shows Transfrm.
   
3. Highlight it and press [ENTER].
4. In following screen you are invited to Uninstall or continue.
5. Press the number to the left of Uninstall. Validate if need be.
6. Return to the Y= editor to type in functions to graph.

Programming is done on 7310, 7324 and 7316 type sets.
Enter programming by pressing the feature key followed by **266344.
When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you want to change the name on.
Press the show key (top right arrow)
The display should say LINE ACCESS
Press the next key (bottom right arrow) .
The display should say CAPABILITIES.
Press the next key (bottom right arrow) .
The display say Name.
press the Chng soft key.
use the dial pad to enter the name. advance using the arrow soft key to go to the next letter
ex. Bill = 2,2 -> 4,4,4 -> 5,5,5 -> 5,5,5
Press the next key (bottom right arrow) to enter the name.
Press the release key when finished