Brother HL 5250DN Laser Printer Logo

Question about Brother HL 5250DN Laser Printer

1 Answer

Flashing lights I unplugged my printer and when I plugged it back in, all 4 lights were flashing. Turning on/off, unplugging, etc. don't help. I changed the toner cartridge & drum within the last 2 mo. Help!

Posted by profCR on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 31 Answers

Hi, I work on these on a regular basis and have seen the problem many times. Almost every single time it's caused by a faulty fuser (fixing) unit. They are fairly easy to replace but they run in the 2-300$ range in cost. Good luck.

Posted on Aug 29, 2007

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

HP M2727 printer has FLASHING attention and ready lights

leave printer on, and unplug the power supply, then wait10 min. plug it back in, this should reset the printer, you might have to do this again and unplug any connections to your computer, wait and then plug in printer with power off and plug in connection to your computer, then turn on printer,, check your ink levels when you power up. if ink levels are low ,you could get this error. if this don;t work go to your printers website and check there solutions or you might have to call them.
0helpful
1answer

All the lights on my HP C4795 keep flashing and I can't print

Hi,

I will suggest you try reset the printer, follow the instruction below to reset your printer, if the problem still persist, replace the cable that connects the printer to the power outlet. If that did not still fix the problem, you will need to reinstall the driver of the printer, you can get it at HP web site.

1. Without turning the unit off, unplug the power cord from the back of the product.
2. Press and hold # and 6 keys.
3. While holding those keys plug the power cord back in.
4. Wait until the screen goes blank before you release those keys.
5. Follow on printer screen instructions.

If that did not fix the problem, try this,
  1. Unplug the power cable from printer while the printer is powered on.
  2. Press and hold OK and HELP buttons while plugging in the power cord. Wait for the screen to go black or blank before releasing the keys.
  3. Just turn on the printer and configure your printer new..
4helpful
2answers

When i turn the printer on the light flashes amber several times, then green then repeats flashing amber, and back to green etc. turning it off and back on made no difference. last time it worked...

when i turn the printer on the light flashes amber several times, then green then repeats flashing amber, and back to green etc. turning it off and back on made no difference. last time it worked normally after being off for a couple of days, but now it is doing that again.

Amber light flashes 7 times, then green for a couple of seconds, then amber 7 times etc.
1helpful
1answer

My HP 2210 PSC all in one printer has all 4 lights flashing and tells me to remove and check cartridges. I have replaced both color and black and whited with new ones but still tells me to check and remove...

Unplug the printer for 15 minutes and plug it back in. You need to clear the memory out of the printer, and by unpluging it for that long usually does the trick.
2helpful
1answer

The orange light is flash with the power light

This can be a few things.. Low ink,, etc..
Did you try unplugging the power cord of the printer for 5 minuets & plug it back in. That sometimes will clear it.. If not - run all the maintenece tools.. Crtg alingment,, ctrg clean etc..
19helpful
1answer

HP C6180

unplug the printer and then plug it back in. turn it on and Hold the 6 and # button until the printer shuts off, this should do a hard reset
8helpful
3answers

Sony Bravia KDL 46", no picture, standby light blinks 4 times

Since the TV is still receiving power, the problem is going to be with the TV's mainboard.  After you unplugged the TV and plugged it back in, you said the power light went out again, so I assume the standby light wasn't flashing again?  The flashing standby light is indicating an error code so my suggestion is to contact Sony for service options regardless if there is a warranty or not because service is the only solution to this situation.  Don't forget to provide them the error code or 4 flashes repeating.
2helpful
2answers

Orange light is flashing

Unplug the power cord for 10 seconds
0helpful
1answer

Light flashing on 2410

Unplug the printer and leave it unplugged overnight (or just a few hours), then plug it back in.
0helpful
2answers

ERROR LIGHTS

Go to this site for help on light/beep codes.
http://www.goodson.com.au/download/manual/cbm/user/CBM1000II%20User%20Manual.pdf
Not finding what you are looking for?

289 views

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6450 Answers

Gary
Gary

Level 2 Expert

301 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...