Error printing data is inaccurate, printing processing is stopped

Go to http://support.sharp.net.au/drivers/ then go to photocopieres, from there scroll down through the models and download the driver for ar 163 and install it and try to print this will resolve your problem , if any quries feel free to contact , rate this and vote for this after getting your problem resolved

Printer is out of ink

Check the white area of document glass and clean it or the copy lamp is not lighting.

check the windows firewall or antivirus.may be blocking the scanner

what is you OS? check you printer drivers. are they properly installed?, what is your connection between your PC to your printer?, AR 275 can be connected thru network, parallel port, and a USB... they have different printer drivers

CCD calibration error. Make sure the optics are clean in the machine in the scanner and free of dust.

The only way to corret the problem is to replase the fixing unit... That is what the L4 is refering to. It is not reading the correct tempurture..

Usually the error is caused by a main drive over load. The machine needs to be looked to determine if its the motor, power supply, or a board.

I got the same error with another type of sharp photocopier AR-M257

My error, I was installing the wrong driver.
I installed the Sharp driver with the PS at the end.

You can download from here depending the version of the Windows you have
http://www.sharpusa.com/products/business/copiers/business_copiers_drivers/


Good luck!!

There is a known problem with adobe 7 printing on this model. Unistall the PCL6 driver and re-install it using the PCL5e driver instead. This will fix your problem.