Fisher and Paykel error codes

Try clean it. Good luck

Error code 130
Watch this
Fisher and Paykel 130 10000010 Error Code Fix

Here ya go Ron, your error codes and what they mean. Good luck!
Fisher Paykel AquaSmart Top Load Washer Error Codes Sears PartsDirect

lift off spray arm and remove motor rotor and remove any debri this can cause a noisey motor.

Rotor position sensor fault, a little green circiut board located on the motor itself.

Hi just read your posting.When the machine stops and starts does it beep and show an error code.This error code will be a series of lights that light up and the machine will beep.On the wash progress line of lights which lights are lit when the machine beeps,Is it the 1st and 6th or the 4th and 8th etc.Please reply with additional information and I am sure I can help you rectify this fault.Looking forward to your reply.

Check the drain pump, it may be overheating and cutting out.

Emptied washer, tipped it on its side, detached drainage pipes underneath, and pulled out old fabric/lint/blockage with tweezers. Plugged in, switched on, all good.

Check the pipes actually work first. Is there a hidden drain filter that is partially blocked? Dissasemble the pump and check it works and the blades inside are clean.

with no error code ... I would check you drain pump or drain hose... you first may want to try a shop vac connected to the end of a drain hose .. let me know if it helps