Question about Samsung HCL4715W 47" Rear Projection Television

1 Answer

Need Lens! Hello, Any suggestions where I could find a Delta 78 lens, #2002110822584012? I have looked on the internet and no luck yet.

Posted by angelacritte on

  • Gregory Noble Dec 25, 2011

    Hello angel, I just so happen'd to be scrapping one day and decided to save the 3 lens, I just thought they were neat. If you still need them, Contact me, Thanks.

    Gregory
    [email protected]

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have two

Posted on Oct 19, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Doesn't start, clicking sound in lens assembly, any solutions?


  • try connecting the unit directly to the adapter or power source . batteries might also be poor and unable to open the lens. if it still don't work then there might be a mechanical problem with the lens have it checked at the nearest service center

Aug 23, 2014 | Panasonic SDR-H85K Camcorder - 80GB - 78 x...

5 Answers

Cannot see anything.


do you see only black image when you look trough it?

Jan 09, 2008 | Bushnell NorthStar 78-8831 (525 x 76mm)...

1 Answer

L3 camera has it's lens stuck open will not retract, screen says "Lens Error", changed out to fresh batteries, no luck, have pushed every button no luck. Can you help?


Hello

Thank you for using FIXYA!!!

This is a suggestion. If you do not feel comfortable trying it, you will need to take the unit to your nearest service centre. Feel free to let me know if you need any assistance.

The problem might be that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Sep 25, 2011 | Nikon COOLPIX L3 Digital Camera

1 Answer

With my Cannon A60, on switching on i get error 78. This happens once in a way. The lens does not even retract.I try removing memory card and put it back, many times it works fine afterwards till next...


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance. Also, please be so kind to let me know if you found this helpful.

Regards
Andrea

Jan 10, 2011 | Canon PowerShot A60 Digital Camera

1 Answer

How do I get motic microscope lens repair? It's an older model-a BA 200. Our lens is a EF Plan 40X objective /0.65 /0.17


You can send the lens to Delta Optical Instruments, Inc.They can determine if your EF Plan 40x objective lens is repairable.The will give you an estimate prior to work or suggest a replacement if it cannot be repaired.email them at:  [email protected]

Oct 06, 2010 | Motic DMBA 300 Binocular Microscope

1 Answer

Lens' in my new Voyager 78-9960 telescope fell out


The small squares are spacers between the lens elements. Most objectives have 2 parts, with one lens like() or (|. That is the one on the outside, with the outwardly curved side facing the object to view. The other lens goes behind it, making the stack look like: (object) --- ())| for the 2 lenses. Sorry, this page does not allow proper graphics, but I hope you get the idea.
Do not tighten the retaining ring too tight - just enough to hold in place. The lenses need a little space for thermal expansion.

Oct 17, 2009 | Bushnell SkyTour 78-9960 (700 x 60mm)...

1 Answer

Canon sd450, e18, need schematic of lens


http://www.e18error.com/

here are instyructions and a reference to the schematic at the bottom of the page.

cheers

Jul 31, 2009 | Cameras

1 Answer

Seeing black during the day


Here are the Bushnell manuals which may help you--

http://www.opticsplanet.net/bushnell-warranty.html

Mar 08, 2009 | Bushnell Deep Space 78-9518 (675 x 114mm)...

2 Answers

Inverted image


All images in astronomical telescopes are upside down and reversed-- this is normal. There is no up or down in space. Reversing the image just adds more GLASS to the light path.

Nov 13, 2008 | Bushnell NorthStar 78-8846 (675 x 114mm)...

1 Answer

FujiFilm A345 Zoom Lens error


Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Nov 10, 2008 | Fuji FinePix A345 Digital Camera

Not finding what you are looking for?
Samsung HCL4715W 47" Rear Projection Television Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...