GE Gas Stove'Error msg. F1"

The F1 error code means that the computer thinks a button on the touchpad is stuck. Sometimes this can be resolved by making sure the touchpad connector fits tight into the control board. The F1 code can be cleared by pushing CANCEL/OFF. If it returns the touchpad needs to be replaced

Hello there:
the clicking sound that you are hearing is the igniotor trying to lite the pilot s but the pilot lite is out what you can do is first lite all of the pilot lites manually and then start the burners normally as you would and now they should work ok
Also if you contact you local gas/ electric company they will come to your home and lite this stove for no charge ok?
I hope this is very helpful for you
Best regards Michael

Does it have electronic ignition (clicking sound when starting) if it doesnt and you have an older model you may need to re light the pilot? Also make sure your getting gas to the unit (you will hear a hissing sound when the burners are turned on) try using a match to light the burner

I was thinking maybe you have a bad ignitor. Or maybe even a weak one. Take a look at that old ignitor. If he glows pretty brite he is alright, if he seems kinda dim replace him.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Put a new iginiter for the oven on your stove.

If neither bake or broil ignitors work you must first verify voltage to the parts.
Most likely a defective electronic control.

spectra stove and it is beeping and reading f7 we have unplug it and replug please help me

The solution is people to find yourselves a better website-this one is full of problems and no solutions!!!

no gas flow sounds like a bad gas regulato on the stove. as for the 5 year old ge profile with ignitors not working, you need a part called a spark modual

There is nothing fancy about how the gas controls work on this unit. Do all burners give you the same problem? If so, it could be a kinked service hose or a service valve that has been partly shut. If it is limited to a single burner or two, the valve may be gummed up and should be replaced.